INJECTOR LOWER GROMMET, 93-95 PRIMARY
Primary Lower Injector Grommet, 93-95
| SKU: | 13-2570-N3A1 |
| Manufacturer SKU: | N3A1-13-257 |
INJECTOR LOWER GROMMET, 93-95 PRIMARY
Injector Grommets are the thick seal at the base of the injector and the dust seal at the top.
$9.06
Related Products:
-
INJECTOR LOWER GROMMET, 93-95 SECONDARY
Secondary Lower Injector Grommet, 93-95
SKU: 13-257A-NF01 Manufacturer SKU: NF01-13-257A -
INJECTOR PLUG KIT, 93-95
INJECTOR PLUG KIT, 93-95
Designed by Racing Beat, this kit comes complete with machined fuel injector plugs, O-rings, Allen head bolts, and a retention plate. The Fuel Injection Plug Kit fits the 1993-95 13B and 20B (2 kits required) engines and is intended for use when removal of the fuel injectors from the intermediate housing is required. This kit has proven to be a popular item when replacing the fuel injection system with a carburetor system or when developing a customized intake system.
SKU: 18148 -
INJECTOR AIR BLEED SECONDARY, 93-95
Secondary Air Bleed Injector, 93-95
Note: Air bleeds are the little plastic diffusers that go in the hole under the injector. 84-88 non turbos use a one piece bleed, while 86-88 turbo and all 89-92 use a two piece bleed (Top & Bottom). These pieces almost always break when removed from the engine. Air bleeds are supplied with their O-rings installed.
SKU: 13-C600-N3A1 Manufacturer SKU: N3A1-13-C60 -
INJECTOR AIR BLEED PRIMARY, 93-95
Primary Injector Air Bleed, 93-95
SKU: 13-C610-N3A2 Manufacturer SKU: N3A2-13-C61 -
INJECTOR O-RING, 93-95 LOWER
Injector Lower O-Ring, 93-95
SKU: 13-ZG30-NF01 Manufacturer SKU: NF01-13-ZG3 -
You May Also Like:
-
VALVE AIR CONTROL, —NLA— 84-85 SE
VALVE AIR CONTROL, 84-85 SE
Sorry, this item has been discontinued by Mazda.
SKU: 13-720B-N304 Manufacturer SKU: N304-13-720B -
AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531 -
VALVE AIR CONTROL, —NLA— 84-85 12A
VALVE AIR CONTROL, 84-85 12A
Sorry, this item has been discontinued by Mazda.
SKU: 13-720B-N251 Manufacturer SKU: N251-13-720B -
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741 -
BPAV GASKET, 86-88 ALL
Bypass Air Control Valve Gasket 86-88 All
SKU: 20-661A-N326 Manufacturer SKU: N326-20-661A -
VALVE VACUUM 1-WAY, 93-95 ALL METAL
1-Way Vacuum Valve, 93-95 All Metal
SKU: 13-8900-NF01 Manufacturer SKU: NF01-13-890