INJECTOR NEW, 89-92 TURBO (PRIMARY/SECONDARY)—NLA—
INJECTOR NEW, 89-92 TURBO (PRIMARY/SECONDARY)
Sorry, this item has been discontinued by Mazda.
| SKU: | 13-2500-N370 |
| Manufacturer SKU: | N370-13-250 |
INJECTOR NEW, 89-92 TURBO (PRIMARY/SECONDARY)
$0.00
Related Products:
-
INJECTOR O-RING, 84-92, RX8 ALL
Injector O-Ring, 84-92, RX8 All
SKU: 13-2530-8574 Manufacturer SKU: 8574-13-253 -
INJECTOR AIR BLEED PRIMARY, 89-92 ALL BOTTOM
Primary Injector Air Bleed, 89-92 All Bottom
SKU: 13-C61A-N350 Manufacturer SKU: N350-13-C61A -
INJECTOR INLET SCREEN, 84-92 INJECTOR FILTER
Injector Inlet Screen, 84-92 Injector Filter
SKU: 13-MZTX-0004 -
INJECTOR LOWER GROMMET, 89-92
Injector Lower Grommet, 89-92
SKU: 13-2570-N350 Manufacturer SKU: N350-13-257 -
INJECTOR AIR BLEED SECONDARY, 89-92 ALL
Secondary Air Bleed Injector, 89-92 All
SKU: 13-C600-N351 Manufacturer SKU: N351-13-C60
You May Also Like:
-
VALVE BPAV, 86-88 TURBO —NLA—
VALVE BPAV, 86-88 TURBO
Sorry, this item has been discontinued by Mazda.
SKU: 20-6600-N332 Manufacturer SKU: N332-20-660 -
AIR FILTER FOAM, 79-85 CARBURETED
Foam Air Filter for Carbs 79-85
The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.
SKU: 16510 -
VALVE VACUUM DELAY, GREEN/BLACK
Vacuum Delay Valve Green/Black. Arrow on body points to black end
SKU: 20-3090-8574 Manufacturer SKU: 8574-20-309 -
VACUUM LINE FILTER, 93-95 TO BOOST SENSOR
Vacuum Line Filter, 93-95 To Boost Sensor
SKU: 18-7440-S5A1 Manufacturer SKU: S5A1-18-744 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE AIR CONTROL, 81-82 FEDERAL/CANADA —NLA—
Sorry, this item has been discontinued by Mazda
Air Control Valve, 81-82 Federal/Canada
NOT California emissionsSKU: 13-7200-N203 Manufacturer SKU: N203-13-720