INSULATOR FUEL RAIL, —NLA— 86-95
INSULATOR FUEL RAIL, 86-95
Sorry, this item has been discontinued by Mazda.
| SKU: | 13-1580-N326 |
| Manufacturer SKU: | N326-13-158 |
INSULATOR FUEL RAIL, 86-95
This is simply the plastic spacer that goes under the primary fuel rail for 86-95 where it bolts to the center housing. The rail will not seal correctly to the top of the injectors without the spacer. This is another part that likes to “disappear” during engine work.
$0.00
Related Products:
-
FUEL RAIL/PRIMARY, —NLA— 89-92 TURBO
FUEL RAIL/PRIMARY, 89-92 TURBO
Sorry, this item has been discontinued by Mazda.
SKU: 13-1500-N370 Manufacturer SKU: N370-13-150 -
FUEL PRESSURE REGULATOR, 86-88 NON-TURBO –NLA–
Sorry, this item has been discontinued by Mazda
Fuel Pressure Regulator, 86-88 Non-Turbo
SKU: 13-2800-N326 Manufacturer SKU: N326-13-280 -
FUEL PRESSURE REGULATOR, 86-88 TURBO
Fuel Pressure Regulator, 86-88 Turbo
SKU: 13-2800-N318 Manufacturer SKU: N318-13-280 -
FUEL PRESSURE REGULATOR, 89-92 —NLA— TURBO (SECONDARY RAIL)
FUEL PRESSURE REGULATOR, 89-92 TURBO (SECONDARY RAIL)
Sorry, this item has been discontinued by Mazda.
SKU: 13-1500-N371 Manufacturer SKU: N371-13-150 -
FUEL RAIL/PRIMARY, 89-92 NON TURBO —NLA—
Primary Fuel Rail, 89-92 Non Turbo
Sorry, this item has been discontinued by Mazda
SKU: 13-1500-N350 Manufacturer SKU: N350-13-150
You May Also Like:
-
VACUUM LINE FILTER, 93-95 TO BOOST SENSOR
Vacuum Line Filter, 93-95 To Boost Sensor
SKU: 18-7440-S5A1 Manufacturer SKU: S5A1-18-744 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE AIR CONTROL, CHECK VALVE- ALL
Check Valve for All Air Control Valves
SKU: 13-7300-1480 Manufacturer SKU: 1480-13-730 -
BPAV GASKET, 86-88 ALL
Bypass Air Control Valve Gasket 86-88 All
SKU: 20-661A-N326 Manufacturer SKU: N326-20-661A -
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530 -
VALVE VACUUM 1-WAY, 93-95 ALL METAL
1-Way Vacuum Valve, 93-95 All Metal
SKU: 13-8900-NF01 Manufacturer SKU: NF01-13-890