INTAKE MANIFOLD GASKET, 13B 6-PORT 86-92 NON-TURBO
Intake Manifold Gasket, 13B 6-Port 86-92 Non Turbo
| SKU: | 13-111A-N326 |
| Manufacturer SKU: | N326-13-111A |
INTAKE MANIFOLD GASKET, 13B 6-PORT 86-92 NON-TURBO
$59.03
Related Products:
-
UPPER INTAKE MANIFOLD GASKET, S4 NON TURBO
UPPER INTAKE MANIFOLD GASKET, S4 NON TURBO
Upper Manifold to Plenum
SKU: 13-135A-N326 Manufacturer SKU: N326-13-135A -
HYLOMAR TUBE, 1.5 OZ
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
SKU: HYLOMAR -
INTAKE MANIFOLD CENTER GASKET, 86-88 NON-TURBO
Intake Manifold Center Gasket, 86-88 Non-Turbo
Between Upper and Lower Manifolds
SKU: 13-112A-N326 Manufacturer SKU: N326-13-112A -
UPPER INTAKE MANIFOLD GASKET, 89-92 NON-TURBO
Upper Intake Manifold Gasket, 89-92 Non-Turbo
Upper Manifold to PlenumSKU: 13-135A-N350 Manufacturer SKU: N350-13-135A -
GASKET SET, RX7 89-92 NON-TURBO —NLA—
This set has been discontinued by Mazda
Gasket Set, RX7 89-92 Non-Turbo
SKU: 10-2710-8DF5 Manufacturer SKU: 8DF5-10-271 -
GASKET SET 86-88 NT, O-RINGS ONLY
GASKET SET 86-88 NT, O-RINGS ONLY
SKU: 10-S60A-N326 Manufacturer SKU: N326-10-S60A
You May Also Like:
-
AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531 -
PURGE VALVE, 79-92—NLA—
Purge Valve, 79-92
Sorry, this item has been discontinued by Mazda
SKU: 20-950A-1480 Manufacturer SKU: 1480-20-950A -
VALVE AIR CONTROL, 93-95 AUTOMATIC
Mazda has discontinued this item.
Air Control Valve, 93-95 Automatic Transmission
This part has been discontinued by Mazda but we have 1 left.
SKU: 13-9900-N3A4 Manufacturer SKU: N3A4-13-990 -
BPAV GASKET, 84-85 GSLSE
Bypass Air Control Valve Gasket 84-85
SKU: 13-7210-N386 Manufacturer SKU: N386-13-721 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE AIR CONTROL, —NLA— 84-85 SE
VALVE AIR CONTROL, 84-85 SE
Sorry, this item has been discontinued by Mazda.
SKU: 13-720B-N304 Manufacturer SKU: N304-13-720B