RX8 OIL CHANGE KIT, IDEMITSU 20W-50 + OIL FILTER + OIL DRAIN PLUG + WASHER
RX8 Oil Change Kit, Includes 5 Quarts Idemitsu 20W-50 + RX8 Oil Filter + Oil Drain Plug + Drain Plug Washer
| SKU: | OCK-RX8-20W-50+FILTER+PLUG+WASHER |
RX8 OIL CHANGE KIT, IDEMITSU 20W-50 + OIL FILTER + OIL DRAIN PLUG + WASHER
$88.04
Related Products:
-
OIL CAP OEM, BLACK – ALL ROTARY
OEM Oil Cap, Black – All Rotary
SKU: 10-250A-0453 Manufacturer SKU: 0453-10-250A -
-
O-RING OIL CAP, ALL OEM 70-08
OEM Oil Cap O-Ring, All 70-08
SKU: 10-2520-8871 Manufacturer SKU: 8871-10-252 -
OIL DRAIN PLUG WASHER, ALL ROTARY 14mm Aluminum
Oil Drain Plug Washer, All Rotary 14mm Aluminum. For Copper click here
SKU: 41-4000-9956 Manufacturer SKU: 9956-41-400 -
OIL 20W-50 IDEMITSU CASE
Idemitsu Oil 20W-50 Case – Per 12qt Case
Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.
- With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
- Allows for better sealing of the chamber, facilitating more power generation
- Extends the life of turbochargers by reducing bearing coking
- Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
- Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
- Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
- Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
SKU: IDE-20W-50-CS
You May Also Like:
-
OIL 10W-30 IDEMITSU CASE (12qts)
Idemitsu Oil 10W-30 – Per 12qt Case
Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, protection, durability, reduces friction and minimizes deposits.
- With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
- Allows for better sealing of the chamber, facilitating more power generation
- Extends the life of turbochargers by reducing bearing coking
- Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
- Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
- Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
- Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
SKU: IDE-10W-30-CS -
RX8 OIL CHANGE KIT-5 QTS IDEMITSU 10W-30 + RX8 FILTER +1QT PREMIX
RX8 Oil Change Kit – 5 quarts Idemitsu 10W-30, RX8 Oil Filter, and 1 Quart Premix
SKU: OCK-RX8-10-30-IDEM-PRE-FILTER -
PREMIX MINI PREMIER KIT
PREMIX MINI PREMIER KIT
1 (16 oz.) Measuring Bottle, 1 Funnel, 1 Quart Premix, Small Carrying Case, 1 Shop Towel
You can order additional Idemitsu Premix here:1 Quart
2 Quarts
4 Quarts
6 Quarts
12 Quarts (Case)Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
This kit is designed for an easy way to carry your premix. Also included is a funnel and a cloth shop towel. All in a convenient clear carrying case so you can see exactly what you have. Plus everything is in one place in your trunk. The approximate dimensions of this case are 11″x10″x3″
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
This kit includes:
1 (16 oz.) Measuring Bottle
1 Funnel
1 Quart Premix
Small Carrying Case
1 Shop TowelOur Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.
SKU: MINI-PREMIER-KIT -
RX7 OIL CHANGE KIT, IDEMITSU 20W-50 + OIL FILTER + OIL PLUG + WASHER
RX7 Oil Change Kit. Includes 5 Quarts Idemitsu 20W-50 + RX7 Oil Filter + Oil Drain Plug + Drain Plug Washer.
SKU: OCK-RX7-20W-50+FILTER+PLUG+WASHER -
IDEMITSU PREMIX FUEL LUBE 4 QUARTS
Idemitsu 4 Quarts Oil Premix Fuel Lube
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
Also available in these quantities:1 Quart
2 Quarts
6 Quarts
12 Quarts (Case)SKU: PRE-4QT -
RX7 OIL CHANGE KIT, 10W-30 IDEMITSU OIL + FILTER + PREMIX + DRAIN PLUG + WASHER
RX7 Oil Change Kit. This kit includes 5 Quarts of Idemitsu 10W-30 Oil + RX7 Oil Filter + 1 Quart Idemitsu PreMix + Oil Drain Plug + Drain Plug Washer.
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
SKU: OCK-RX7-10W-30+FILTER+PRE+PLUG+WASHER