FLYWHEEL DOWEL PIN, ALL
Flywheel Dowel Pin, All
Flywheel Dowel Pins have been needed a few times when someone has damaged them, or the machine shop surfacing the flywheel “lost” them.
| SKU: | 30-8220-9923 |
| Manufacturer SKU: | 9923-30-822 |
FLYWHEEL DOWEL PIN, ALL
$5.04
Related Products:
-
NUT FLYWHEEL, FLYWHEEL/ECCENTRIC
Flywheel Nut, Flywheel/Eccentric Shaft
SKU: 11-711C-0810 Manufacturer SKU: 0810-11-711C -
FLYWHEEL STOPPER TOOL ALL N/A diameter flywheels
Flywheel Stopper Tool, All Non-Turbo diameter flywheels (Except RX-8’s)
Flywheel stopper makes getting the flywheel / counterweight nut off a LOT easier.
For flywheels 11 3/4″ diameter.SKU: 49-220NT Manufacturer SKU: 49-220NT -
FLYWHEEL SOCKET TOOL, 54MM IMPACT SOCKET
Flywheel Impact Socket Tool, 54mm, 3/4″ drive
SKU: 49-22009HD -
-
FLYWHEEL STOPPER TOOL, TURBO, AUTO TRANS AND RX8
Flywheel Stopper Tool, Turbo, Automatic Transmission And RX8 Manual
SKU: 49-220TB Manufacturer SKU: 49-220TB -
DOWEL PIN REMOVER TOOL
Dowel Pin Remover Tool
Tool makes pulling the dowels out of the rotor and side housings a piece of cake during engine dis-assembly.
SKU: 49-1290
You May Also Like:
-
SEAL TRANSMISSION FRONT INPUT 09-11 RX8 MAN TRANS
Front Transmission Seal Input, 09-11 RX8 Manual Transmission
SKU: 16-1030-P501 Manufacturer SKU: P501-16-103 -
FLYWHEEL ALUMINUM, 74-82 (Does NOT include counterweight)
FLYWHEEL ALUMINUM, 74-82 W/O COUNTERWEIGHT
For 74-82 style CLUTCHES — The actual flywheel ONLY fits 74-92 non-turbos. The CLUTCH HARDWARE (included) is what differs.
The 74-82 clutch pressure plate uses no spacers while the 83-92 (non-turbo) pressure plates need the spacers.SKU: 11433 -
CLUTCH DISC, ALL ROTARY -82
Clutch Disc, All Rotary up to 82
Stock/Original EquipmentSKU: 16-460A-HE11 Manufacturer SKU: HE11-16-460A -
BELLHOUSING BOLT, LOWER RIGHT 72-92
Lower Right Bell Housing Bolt 72-92
SKU: 41-0400-9978 Manufacturer SKU: 9978-41-040 -
-
REAR COUNTERWEIGHT, 12A 83-85 RX7
Rear counterweight for 83-85 12A Engines — they have the “N” on the rotors
These were discontinued by Mazda — We are having them made.
We took a few pair of 83-85 12A rotors, weighed them all for an average, set the bobweights for those weights on a 12A eccentric shaft then we re-balance NEW 13B rear counterweights to match.
SKU: 11-751A-N226-MOD Manufacturer SKU: N226-11-751A-MOD