DRIVESHAFT, 86-92 N/A WITH TURBO TRANSMISSION
Aftermarket Driveshaft, 86-92 Non-Turbo CAR with Turbo Transmission Swapped in, still using the non-turbo differential
| SKU: | 2691-799 |
DRIVESHAFT, 86-92 N/A WITH TURBO TRANSMISSION
DRIVESHAFT Non-Turbo 86-92 CAR with Turbo Transmission Swapped in, still using the non-turbo differential
(engine does not matter).
$367.42
Related Products:
-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
For our aftermarket Steel drivshafts. Fits all our driveshafts that start with 2691.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 2651-60 -
DRIVESHAFT FLANGE, 86-92 Non-Turbo, 93-95 Manual, RX8 Manual
DRIVESHAFT FLANGE, 86-92 Non-Turbo, 93-95 Manual, RX8 Manual
SKU: 2602-37 -
BOLT DRIVESHAFT, 86-11 RX7 & RX8
DriveShaft Bolt, 86-11 RX7 & RX8
SKU: 25-1230-P012 Manufacturer SKU: P012-25-123 -
NUT DRIVE SHAFT, 86-11 RX7 & RX8
Drive Shaft Nut, 86-11 RX7 & RX8
SKU: 25-1240-1368 Manufacturer SKU: 1368-25-124 -
WASHER DRIVE SHAFT, 86-11 RX7 & RX8
Drive Shaft Washer, 86-11 RX7 & RX8
SKU: 11-0000-9997 Manufacturer SKU: 9997-11-000 -
DRIVESHAFT YOKE, RX7 Turbo & AutoTrans, RX8 Manual Trans
DRIVESHAFT YOKE, RX7 Turbo & AutoTrans, RX8 Manual Trans
Driveshaft Yoke
Fits our: 2691-799, 2691-705, 2691-706, 3191-799A, 3191-705A, 2691-2535
SKU: 2603-25
You May Also Like:
-
-
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DIFF PINION BEARING 87-92, TURBO FRONT (2 REQ)
Differential Front Pinion Bearing 87-92, Turbo
(2 REQ)SKU: 27-1430-P016 Manufacturer SKU: P016-27-143 -
DIFF STUB SHAFT S5, NON TURBO LSD LEFT—NLA—
DIFF STUB SHAFT S5, NON TURBO LSD LEFT
Sorry, this item has been discontinued by Mazda.
SKU: 27-280B-M0B1 Manufacturer SKU: M0B1-27-280B -
CV BOOT KIT, 86-92 TURBO INNER
Inner CV Boot Kit, 86-92 Turbo
SKU: 22-540A-M040 Manufacturer SKU: M040-22-540A -
DRIVESHAFT, 83 ALL + 84-85 WITH MANUAL TRANSMISSION
Aftermarket Driveshaft, 83 All + 84-85 With Manual Transmission
SKU: 2691-701