DRIVESHAFT, 86-92 NON TURBO MANUAL TRANSMISSION
Aftermarket DrIveshaft, 86-92 Non Turbo Manual Transmission
| SKU: | 2691-704 |
DRIVESHAFT, 86-92 NON TURBO MANUAL TRANSMISSION
This is an aftermarket driveshaft for all 86-92 non-turbo manual transmission RX7’s. It is much less expensive than a factory OEM shaft.
Note: The factory Mazda OEM driveshafts from ’83-on have non-replaceable U-joints — you have to buy a new driveshaft if they wear out.
The aftermarket driveshafts we offer are completely new, balanced and ready to install. They incorporate traditional replaceable u-joints so you can rebuild them if you ever wear them out. For whatever reason, people call us daily asking if this driveshaft is complete.
$367.42
Related Products:
-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
For our aftermarket Steel drivshafts. Fits all our driveshafts that start with 2691.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 2651-60 -
DRIVESHAFT OEM, 89-92 NON TURBO MAN TRANS–NLA–
OEM Driveshaft, 89-92 Non Turbo Manual Transmission
Sorry, this item has been discontinued by Mazda
SKU: 25-1000-M092 Manufacturer SKU: M092-25-100 -
DRIVESHAFT FLANGE, 86-92 Non-Turbo, 93-95 Manual, RX8 Manual
DRIVESHAFT FLANGE, 86-92 Non-Turbo, 93-95 Manual, RX8 Manual
SKU: 2602-37 -
U-JOINT NON OEM, FITS ALL WITH PART# 3191-
U-JOINT NON OEM, FITS ALL WITH PART# 3191-
For our aftermarket ALUMINUM drivshafts. Fits all our driveshafts that start with 3191.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 5-788X -
DRIVESHAFT YOKE, Non-Turbo Manual Trans RX7
DRIVESHAFT YOKE, Non-Turbo Manual Trans RX7
Fits 83-92 Non-Turbo RX7 Transmissions. Fits our shafts 2691-701, 2691-704, 2691-704A
Uses a 7260 Dodge u-Joint which we sell as part number 2651-60
Does not work with the factory driveshaft
SKU: 2603-22 -
DRIVESHAFT ALUMINUM, 86-92 NON TURBO MANUAL TRANSMISSION ALL
Aftermarket Aluminum Driveshaft, 86-92 Non-Turbo, Manual Transmission only
(This means Non-turbo Transmission in an 86-92 RX7 with a Non-turbo differential)SKU: 3191-798A
You May Also Like:
-
DIFF AXLE SEAL, 93-95 & RX8
Differential Axle Seal, 93-95 & RX8
SKU: 27-238A-P043 Manufacturer SKU: P043-27-238A -
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DIFF AXLE SEAL SIDE, 86-92 TURBO
Differential Side Axle Seal, 86-92 Turbo
SKU: 27-2380-P016 Manufacturer SKU: P016-27-238 -
DIFF STUB SHAFT, N/A, S4 ALL, S5 OPEN—NLA—
Differential Stub Shaft
Fits all 86-88 non-turbo – both open and limited slips.
Also fits 89-92 non-turbo OPEN diffs (non-LSD).
Sorry, this item has been discontinued by Mazda
SKU: 27-270C-M055 Manufacturer SKU: M055-27-270C -
DIFF KAAZ 2-WAY, 84-92 NON TURBO
KAAZ Limited Slip Differential 2-Way, 84-92 Non Turbo
SKU: DBZ1810-2 -
CV BOOT KIT, 86-92 TURBO INNER
Inner CV Boot Kit, 86-92 Turbo
SKU: 22-540A-M040 Manufacturer SKU: M040-22-540A