WATER SEAL GROOVES CUT (1 SIDE)
Cut waterseal grooves. 86-95
Turn around is approximately 3 weeks from when housings are received AT Mazdatrix. Time does NOT include shipping back to you.
| SKU: | SV-WATERSEAL |
| Manufacturer SKU: | SV-WATERSEAL |
WATER SEAL GROOVES CUT (1 SIDE)
Price is for ONE side, which is TWO grooves. Cut back to the OEM depth.
This can “salvage” an 86-95 side housing that has needed lapping that then has the housing “too thin”. We have found the MINIMUM depth of the water seal grooves to be ~.056″. Any less than that and the water seal sticks up too high.
$330.00
You May Also Like:
-
WPC TREATMENT FRONT OR REAR SIDE HOUSING
WPC Treatment One Front or Rear Side Housing
SKU: WPC-SIDE-HOUSIN -
WPC TREATMENT, ONE DOWEL PIN
WPC Treatment, One Dowel Pin
Treatment Only. Part not included.SKU: WPC-DOWEL-PIN -
Side Cut Two Rotors
Side cut two rotors for high RPM or high boost engines.
When a Rotary engine is spun to high RPM’s — say 8500+, or has a lot of boost, the rotors tend to “wobble” (for lack of a better term) and first the corner seal area hits the side housings- then more of the rotor and rotor gear will hit the side housings. Needless to say this is bad — trashes the rotors and damages the side housings.
For “race” motors we machine off anywhere from .005″ to .008″ per side to gain the extra clearance needed. Please tell us the RPM and / or boost you are going to be using.
Price does not include the rotors or return shipping to you.
We can do this to either new (which we prefer) or CLEANED used rotors — you have to clean them please.SKU: SV-ROTOR-SIDE -
SERVICE PRESS ONE BEARING WITH SCREW
SERVICE PRESS ONE BEARING WITH SCREW
Labor only for 93-11 Main bearings which all use a retaining screw.
Does not include a new/replacement screw.
SKU: SV-BRG-PRESS8S6 -
SERVICE CUT 3MM APEX SEAL GROOVE RX7 or RX8
SERVICE CUT 3MM APEX SEAL GROOVE in 2MM RX7 or RX8 Rotors
Price is to do a PAIR of rotors. Price DOES NOT INCLUDE the rotors.
Either buy them new from us or ship your pair to us.
Turn around is approximately 3 weeks from when rotors are received AT Mazdatrix. Time does NOT include shipping back to you.
SKU: SV-CUT-3MM-RX7 -
WPC TREATMENT, ONE APEX SPRING
WPC Treatment, One Apex Seal Spring
Treatment only. Part not included.SKU: WPC-APEX-SPRING