HOLLEY 13B STREET PORT, 4 PORT
Holley Street Port 13B 4 Port (uses 600 cfm carb.)
Instructions
SKU: | 18038 |
HOLLEY 13B STREET PORT, 4 PORT
We offer the popular Racing Beat-modified High Performance Holley Intake System Kit for the 1974-1985 13B 4 Port Street Port engine.
Racing Beat’s Holley Intake Kit for the 13B 4 Port Street Port engine has proven over the years to be an extremely reliable carburetor upgrade, with very “streetable” engine smoothness and drivability characteristics. The Street Port Holley Kit includes the same basic components as our non-ported engine Holley Kits; however, the specific modifications to the carburetors are significantly different. The carburetor used for the 13B 4 Port Street Port applications features a larger 600 CFM model utilizing a mechanical choke and mechanical secondaries.
One of most significant benefits of this complete ready-to-go kit is that is takes all the guesswork, trial-and-error, and frustration out of attempting to assembly your own intake kit! We’ve taken over 40 years of our rotary engine experience and know-how and combined it for you in this complete, ready-to-install kit. Our intake kits has been thoroughly developed and tested using our in-house engine dyno to ensure maximum performance for each specific engine application.
The heart of each intake system is a performance-proven Holley carburetor. Depending on the requirements of each specific application, the carburetor is disassembled by Racing Beat’s carburetor technicians then reworked, retuned, and reconfigured specifically for use with a designated rotary engine application. This process is not a simple “re-jetting” project, but a complex series of steps requiring machining, drilling and reconfiguring of the main and metering bodies, adjustment of the float bowls, and complete replacement of all jets.
Headers must be used with these street port intake systems to achieve maximum horsepower gains.
Note: Installation of this kit requires use of a high performance fuel pump delivering 6 psi @ 20 gph.
$1,706.34
Related Products:
-
HEATSHIELD, 74-95 ALL 12A & 13B
Heatshield, 74-95 All 12A & 13B
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16219 -
HOLLEY THROTTLE CABLE BRACKET 6-PORT
Holley, Throttle Cable Bracket for 6-Port
If you have a non 6-Port refer to Part Number 91100.SKU: 18061 -
HOLLEY CARBURETOR ONLY, 13B BRIDGE PORT 650 RACING BEAT-MODIFIED
Racing Beat Modified Holley Carburetor Only Bridgeport 13B (uses 650 cfm carb.)
We offer the extremely popular Racing Beat-modified High Performance Holley carburetor for the 1974-85 13B 4-Port Bridge-Ported engine application. This 650 cfm – Double Pumper with mechanical secondaries – carburetor is the same modified component that is included in our complete 1974-85 13B 4-Port Bridge-Port Kit. The optional air cleaner assembly, fuel line, and manifold shown are not included, but are available with the complete kit, or as separate items.
Each carburetor is modified by Racing Beat to maximize the performance of a specific engine application. Every carburetor is disassembled, modified and reworked by a Racing Beat carburetor technician. These modifications are the results of countless hours of engine dyno testing and real-world testing. These extensive modifications are undertaken to increase the airflow to meet the demands of the rotary engine.
This carburetor requires the use of a high performance fuel pump delivering 6 psi @ 20 gph, we suggest the use of the Mallory 4070M unit.
For optimum performance, combine this Holley carburetor with a matched Racing Beat intake manifold and the Holley Float Bowl Fuel Line.
SKU: 16639 -
HOLLEY THROTTLE CABLE BRACKET
Holley, Throttle Cable Bracket
If you have a 6 port, refer to Part Number 18061.SKU: 91100 -
HOLLEY CARBURETOR ONLY, 13B 4 PORT STREET PORT 600 CFM RACING BEAT MODIFIED
Racing Beat Modified Holley Carburetor Only, Street port 13B 4-Port (uses 600 cfm carb.)
Racing Beat’s Holley Intake Kit for the 1974-85* 13B 4-Port Street Port engine has proven over the years to be an extremely reliable carburetor upgrade, with very “streetable” engine smoothness and drivability characteristics. We offer the carburetor included with this kit seperately for those looking for a replacment for the orignal Racing Beat-modified unit. The carburetor we supply for the 13B 4-Port Street Port applications features a 600 CFM model utilizing a mechanical choke and mechanical secondaries. As supplied, this carburetor does not include the mounting and attachment hardware that was originally supplied with the complete kit.
The heart of each intake system is a performance-proven Holley carburetor. Depending on the requirements of each specific application, the carburetor is disassembled by Racing Beat’s carburetor technicians then reworked, retuned, and reconfigured specifically for use with a designated rotary engine application. This process is not a simple “re-jetting” project, but a complex series of steps requiring machining, drilling and reconfiguring of the main and metering bodies, adjustment of the float bowls, and complete replacement of all jets.
SKU: 16630 -
MANIFOLD HOLLEY, 84-92 6-PORT ALL
Holley Manifold, 84-92 13B 6-Port All
The Racing Beat-designed intake manifold for the 1984-92 13B 6-Port rotary engine is ideally suited to meet the performance requirements of the Holley carburetor. Designed by Chief Engineer/Engine Builder Jim Mederer, these cast aluminum intake manifolds have proven themselves in a variety of RX-7 street or custom race applications.
Please note: it is highly recommended that the intermediate housing be port-matched to the manifold when using this manifold with the 1984-5 13B 6-Port engine configuration.
All of Racing Beat’s 13B intake manifolds for Holley carburetor applications are sand-cast by a local foundries and delivered to our in-house production shop for all machining and surface finishing processes. Select manifolds are then hand-ported to match a specific intake port configuration for an intended engine application. Further machining is then undertaken to match the base-plate surface to the Holley carburetor base. These critical machining steps ensure a positive fitment between both the engine surface and the carburetor base. Every manifold is then surface finished using a ball-burnishing process that enhances the final appearance of the aluminum material. Once these labor-intensive processes have been completed these manifolds look as good as they perform!
If needed, an engine-to-manifold gasket (1984-85), (1986-88), or (1989-92), and/or Holley base gasket are available separately.
SKU: 16476