NUT CAP INTAKE 93-95 CAP TO THROTTLE BODY 6MM–NLA–
Sorry, this item has been discontinued by Mazda
NUT CAP INTAKE 93-95 CAP TO THROTTLE BODY 6MM
| SKU: | 00-6000-9WE3 |
| Manufacturer SKU: | 9WE3-00-600 |
NUT CAP INTAKE, 93-95 CAP TO THROTTLE BODY 6MM
$4.98
Related Products:
-
PULSATION DAMPER, 93-95
Pulsation Damper, 93-95 Twin Turbo
SKU: 20-1800-N3A2 Manufacturer SKU: N3A2-20-180 -
O-RING THROTTLE BODY TO INLET PIPE 93-95
Throttle Body to Inlet Pipe O-Ring 93-95
SKU: 13-W690-N390 Manufacturer SKU: N390-13-W69 -
NUT CAP INTAKE, 93-95 THROTTLE BODY TO MANIFOLD 8MM
Intake Nut Cap, 93-95 Throttle Body To Manifold 8mm
SKU: 20-800G-9993 Manufacturer SKU: 9993-20-800G -
-
UPPER INTAKE GASKET, THROTTLE BODY TO PLENUM J-SPEC COSMO
Upper Intake Gasket, Throttle Body to Plenum, J-Spec Cosmo 13B
SKU: 13-655A-NF01 Manufacturer SKU: NF01-13-655A -
UPPER INTAKE GASKET, 93-95 THROTTLE BODY TO PLENUM
Upper Intake Gasket, 93-95
Throttle Body To Plenum
SKU: 13-6550-N3A1 Manufacturer SKU: N3A1-13-655
You May Also Like:
-
AIR FILTER FOAM, 79-85 CARBURETED
Foam Air Filter for Carbs 79-85
The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.
SKU: 16510 -
VALVE VACUUM 1-WAY, 93-95 ALL METAL
1-Way Vacuum Valve, 93-95 All Metal
SKU: 13-8900-NF01 Manufacturer SKU: NF01-13-890 -
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741 -
VALVE AIR CONTROL, 93-95 MANUAL—NLA—
VALVE AIR CONTROL, 93-95 MANUAL
Sorry, this item has been discontinued by Mazda.
SKU: 13-9900-N3A3 Manufacturer SKU: N3A3-13-990 -
VALVE AIR CONTROL, CHECK VALVE- ALL
Check Valve for All Air Control Valves
SKU: 13-7300-1480 Manufacturer SKU: 1480-13-730 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490