1982
Engine
-
OIL METERING PUMP GASKET, ALL 74-85 12A
Oil Metering Pump Gasket, All 74-85 12A
SKU: 14-6110-N2Y0 Manufacturer SKU: N2Y0-14-611 -
OIL METERING PUMP O-RING, 79-88 END CAP (EACH)— NLA —
OIL METERING PUMP O-RING, 79-88 END CAP (EACH)
Sorry, this item has been discontinued by Mazda.
SKU: 23-8370-0730 Manufacturer SKU: 0730-23-837 -
OIL METERING PUMP, ALL 74-85 EXCEPT 84-85 13B—NLA—
Sorry, this item has been discontinued by Mazda
Oil Metering Pump, All 74-85 Except 84-85 13B
SKU: 14-6000-N249 Manufacturer SKU: N249-14-600 -
OIL PAN 12A, —NLA— 81-85 CALIFORNIA
OIL PAN 12A, 81-85 CALIFORNIA
Sorry, this item has been discontinued by Mazda.
SKU: 10-700A-N201 Manufacturer SKU: N201-10-700A -
OIL PAN 12A, —NLA— 81-85 FEDERAL
OIL PAN 12A, 81-85 FEDERAL
Sorry, this item has been discontinued by Mazda.
SKU: 10-7000-N203 Manufacturer SKU: N203-10-700 -
OIL PAN 13B, 84-85 CALIFORNIA WITHOUT SUBZERO START ASSIST
Oil Pan 13B, 84-85 California, Without Sub Zero Start Assist
(also to install 13B in 79-85 RX-7)SKU: 10-700A-N305 Manufacturer SKU: N305-10-700A -
OIL PAN BAFFLE, 12A 71-85
Racing Beat Oil Pan Baffle, 12A 71-85
The Racing Beat-designed and manufactured Oil Baffle Plate slows the return of engine oil as it drains from the engine into the pan. In slowing the oil’s return, air that has been suspended in the oil (as foam) is allowed more time to separate from the oil.
Removing this trapped air both improves the ability of the oil to transfer heat and reduces pressure drops at high RPM. The plate is sandwiched between the engine and the oil pan. It is recommended that two oil pan gaskets be used, one below and one above the plate, to provide proper sealing. Gaskets are not supplied, but are available separately if needed.
SKU: 11823 Manufacturer SKU: 11823 -
OIL PAN BAFFLE, 12A COMPETITION—NLA—
OIL PAN BAFFLE, 12A COMPETITION
Sorry, this item has been discontinued by Mazda.
SKU: 10-7090-4352 Manufacturer SKU: 4352-10-709 -
OIL PAN BOLT SET (FOR ALL 2-ROTOR ENGINES) 22-BOLTS—NLA —
OIL PAN BOLT SET (FOR ALL 2-ROTOR ENGINES) 22-BOLTS
Sorry, no longer available.
This set fits all 2 rotor engines. Contains 22 bolts—-not all 2 rotor engines will need all 22 bolts.
6 x 1.0 with 10mm of thread–this is the OEM length.
**PLEASE NOTE: This bolt length is NOT recommended for use with oil pan baffles!!!!**
We see those oil pan stud & nut sets on Ebay–they are an ok idea but you have to remember they must ALL be removed to adequately clean the old gasket & sealer off your engine. They also say the studs “stop oil pan gasket leaking due to engine flex”….. IF YOUR ENGINE IS FLEXING THAT MUCH YOU HAVE A LOT OF OTHER THINGS WRONG WITH IT! Your engine should not be flexing enough to allow the gasket to leak!
SKU: OIL-PAN-BOLT-SET -
-
-
OIL PAN HOLE COVER PLATE, OIL LEVEL SENSOR
Oil Pan Hole Cover
(covers oil level sensor hole)SKU: MTX005 -
OIL PICK UP TUBE GASKET, 70-95 ALL
Oil Pick Up Tube Gasket, 70-95 All
SKU: 14-171B-0810 Manufacturer SKU: 0810-14-171B -
OIL PICK UP TUBE, 12A 79-85, 13B GSLSE
Oil Pick up Tube, 12A 79-85
84-85 13B GSLSESKU: 14-1600-8871 Manufacturer SKU: 8871-14-160 -
OIL PRESSURE SENDER, 81-92 ALL
Oil Pressure Sender, 81-92 All
SKU: 14-8200-N201 Manufacturer SKU: N201-14-820 -
OIL PRESSURE SENDING UNIT PLUG, 1/8 BSP
Oil Pressure Sending Unit Plug, 1/8 BSP, Plug
This is to plug the oil pressure sending unit hole, in the rear side housing, when it is not being used.
It has a 1/8 British Standard Pipe thread — hard to find.
SKU: 31-000J-9950 Manufacturer SKU: 9950-31-000J -
OIL PUMP CHAIN, 74-85 ALL—NLA—
Oil Pump Chain, 74-85 All
Sorry, this item has been discontinued by Mazda
SKU: 14-1420-0839 Manufacturer SKU: 0839-14-142 -
-
OIL PUMP SPROCKET NUT 74-11 RX7 AND RX8
RX7 & RX8 Oil Pump Sprocket Nut 74-11
SKU: 21-2000-9992 Manufacturer SKU: 9992-21-200
