1977
Engine
-
FRONT COUNTERWEIGHT, —NLA— 76-80 12A
FRONT COUNTERWEIGHT, 76-80 12A
Sorry, this item has been discontinued by Mazda.
Picture is of a used Counterweight that we sell on our Ebay Store (Mazdatrix1)
SKU: 11-5110-1881 Manufacturer SKU: 1881-11-511 -
FRONT COVER GASKET, ALL ROTARY 74-85 and Some 86-88 (FOR O-Ring type only)
Front Cover Gasket, All Rotary 74-85 and Some 86-88 (For O-Ring type only)
For 86-92, Do not order without reading FAQSKU: 10-5020-N2Y0 Manufacturer SKU: N2Y0-10-502 -
FRONT ENGINE MOUNT BOLT, PLATE TO FRONT COVER 72-85 (ea)
Front Engine Mount Bolt. Plate to Front Cover. 72-85 RX7 (ea)
SKU: 10-1015-0250 Manufacturer SKU: 0250-10-1015 -
FRONT MAIN OIL SEAL, ALL THRU 92
Front Main Oil Seal, All Through 92
SKU: 10-6050-0820 Manufacturer SKU: 0820-10-605 -
FRONT OIL PRESSURE REGULATOR PISTON 72-08
Front Oil Pressure Regulator Piston 72-08
Click Here for the Spring Used with this Piston
SKU: 14-1150-0839 Manufacturer SKU: 0839-14-115 -
GASKET SET 74-85, O-RINGS ONLY
Gasket Set 74-85, O-Rings Only
This kit contains:
Red Water Jacket Seals
Black Water Jacket Seals
Tension Bolt Seals
Rear Stationary Gear O-Ring
Dowel Pin O-Rings
Front Cover O-Ring
Oil Filter Stand O-Rings
Distributor O-Ring
SKU: 23-040B-1757 Manufacturer SKU: 1757-23-040B -
GASKET SET, 13B 4 PORT 74-78—NLA—
GASKET SET, 13B 4 PORT 74-78
Sorry, this kit has been discontinued by Mazda.
SKU: 99-100D-3565 Manufacturer SKU: 3565-99-100D -
GASKET SET, RX7 81-82 12A —NLA—
GASKET SET, RX7 81-82 12A
Sorry, this item has been discontinued by Mazda.
SKU: 89-100A-N201 Manufacturer SKU: N201-89-100A -
HEATER HOSE HOLE PLUG, IN REAR HOUSING -80 16MM —NLA—
HEATER HOSE HOLE PLUG, IN REAR HOUSING -80 16MM
Sorry, this item has been discontinued by Mazda
Alternatively, you can use our 16mm plug
Rear Iron Heater Hose Hole Plug, 74-80 16mm
SKU: 11-6000-9951 Manufacturer SKU: 9951-11-600 -
HOSE OIL METERING, 72-85 CARB PER FOOT
Oil Metering Hose, 72-85, Carb., PER FOOT
We have found this hose to work well for the oil metering lines for early cars that do not use fittings on the line ends. This hose can be used stand-alone, it will push directly onto the nipples at the carb and the metering pump, OR it can be used to splice an OEM metering hose by pushing over the OEM plastic hose.
At this time the 12A OEM short hose is only one available for carbs. We typically will use two short OEM lines and cut one and extend it about two inches in the middle with this hose to make a long line.
This hose also works well to splice/repair any OEM injector line for all 70-11 rotary.
Sold by the foot.SKU: MOPHOSE-1 -
HOUSING CENTER, 75-78 13B—NLA—
HOUSING CENTER, 75-78 13B
Sorry, this item has been discontinued by Mazda.
SKU: 23-0700-1708 Manufacturer SKU: 1708-23-070 -
HOUSING FRONT, —NLA— ALL 74-75 & REPU-77, 13B Port
HOUSING FRONT, ALL 74-75 & REPU-77, 13B Port
Sorry, this item has been discontinued by Mazda.
SKU: 10-200C-1757 Manufacturer SKU: 1757-10-200C -
HOUSING REAR, 74-85 4-port—NLA—
HOUSING REAR, 74-85 4-port
Sorry, this item has been discontinued by Mazda.
SKU: 23-0950-3565 Manufacturer SKU: 3565-23-095 -
HYLOMAR TUBE, 1.5 OZ
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
SKU: HYLOMAR -
-
-
NUT FLYWHEEL, FLYWHEEL/ECCENTRIC
Flywheel Nut, Flywheel/Eccentric Shaft
SKU: 11-711C-0810 Manufacturer SKU: 0810-11-711C -
O-RING DOWEL PIN, ALL ROTARY
Dowel Pin, O-Ring All Rotary
SKU: 10-B730-N3A1 Manufacturer SKU: N3A1-10-B73 -
O-RING ECCENTRIC PLUG, —NLA— EARLY SHAFT
O-RING ECCENTRIC PLUG, —NLA— EARLY SHAFT
Sorry, this item has been discontinued by Mazda.
SKU: 10-1101-9954 Manufacturer SKU: 9954-10-1101 -
O-RING FRONT COVER, ALL ROTARY
Front Cover O-Ring, All Rotary
SKU: 10-1740-N231 Manufacturer SKU: N231-10-174