SEAL WHEEL REAR, 84-85 AXLE SEAL
Rear Wheel Axle Seal, 84-85
| SKU: | 26-1540-1011 |
| Manufacturer SKU: | 1011-26-154 |
SEAL WHEEL REAR, 84-85 AXLE SEAL
$8.04
Related Products:
-
BEARING REAR WHEEL, 84-85 INCLUDING COLLAR
Rear Wheel Bearing, Including Collar, 84-85
Outside Diameter: 2.83″
Inside Diameter: 1.377″SKU: 26-1510-8595-MV Manufacturer SKU: 8595-26-151-MV -
TIE ROD END, 79-85 OUTER
Outer Tie Rod End, 79-85
Click Here for Tie Rod End Castle Nut
SKU: 32-2800-8021 Manufacturer SKU: 8021-32-280 -
TIE ROD END, 79-85 INNER
Inner Tie Rod End, 79-85
Click Here for Tie Rod End Castle Nut
SKU: 32-240A-8531 Manufacturer SKU: 8531-32-240A -
TIE ROD JAMB NUT, 79-85 LEFT THREAD
Left Thread Tie Rod Jamb Nut, 79-85
SKU: 41-4000-9994 Manufacturer SKU: 9994-41-400 -
SPACER REAR AXLE BEARING, 84-85
Rear Axle Bearing Spacer, 84-85
SKU: 26-1550-FA66 Manufacturer SKU: FA66-26-155 -
TIE ROD JAMB NUT, 79-85 RIGHT THREAD
Right Thread Tie Rod Nut, 79-85
SKU: 21-4000-9992 Manufacturer SKU: 9992-21-400
You May Also Like:
-
DIFF STUB SHAFT, N/A, S4 ALL, S5 OPEN—NLA—
Differential Stub Shaft
Fits all 86-88 non-turbo – both open and limited slips.
Also fits 89-92 non-turbo OPEN diffs (non-LSD).
Sorry, this item has been discontinued by Mazda
SKU: 27-270C-M055 Manufacturer SKU: M055-27-270C -
DIFF KAAZ 1.5 WAY, 84-92 NON TURBO
KAAZ Limited Slip Differential, 1.5 Way, 84-92 Non Turbo
SKU: DBZ1810 -
DIFF CARRIER, 09-11 RX8
Differential Carrier, 09-11 RX8
Empty differential carrier. Does not include any gears, seals, differential, or pinion flange.
SKU: 27-1500-RA15 Manufacturer SKU: RA15-27-150 -
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DIFF PINION BEARING, 86-92 TURBO MIDDLE, 93-11 FRONT
Differential Pinion Bearing,
Fits: 86-92 Turbo Middle
93-11 FrontSKU: 27-2200-0604 Manufacturer SKU: 0604-27-220 -
DIFF STUB SHAFT S5, NON TURBO LSD LEFT—NLA—
DIFF STUB SHAFT S5, NON TURBO LSD LEFT
Sorry, this item has been discontinued by Mazda.
SKU: 27-280B-M0B1 Manufacturer SKU: M0B1-27-280B