OIL COOLER, 84-85 GSLSE
Oil Cooler, 84-85 GSLSE
SKU: | 14-750D-N304 |
Manufacturer SKU: | N304-14-750D |
OIL COOLER, 84-85 GSLSE
Mazda factory OEM oil cooler for 84-85 13B GSLSE’s, This cooler also works well in the ’84-85 12A cars as the tabs are already in the chassis to bolt this cooler to. You will need to purchase the 84-85 13B cooler hose set. It works MUCH better than the oil-to-water black “beehive” coolers that come stock on 12A’s from 83-85.
Note: As of 3/2013, we are seeing the fittings glued in from the factory on the GSLSE oil cooler. This is good news if you are using stock hoses. If you are using aftermarket hoses, you will have to heat the glue with a torch to remove the fittings. We heat the fitting and cooler bung with a torch just until the glue starts to smoke and the fitting comes out easily. We have had no problem doing this, but please understand that Mazda didn’t intend for the fittings to be removed and THIS WILL VOID MAZDA’S WARRANTY!
The 79-82 and 86-92 coolers do not come with fittings from the factory, so they do not have this issue.
$776.32
Related Products:
-
OIL COOLER THERMOSTAT, ALL -92
Oil Cooler Thermostat, OEM, All -92
SKU: 14-8100-8871 Manufacturer SKU: 8871-14-810 -
OIL COOLER THERMOSTAT 22mm CRUSH WASHER
Oil Cooler Thermostat Washer
Sealing Washer for Thermostat in the bottom of the stock oil coolerSKU: 42-2000-9956 Manufacturer SKU: 9956-42-200 -
OIL COOLER HOSE SET, 84-85 STAINLESS SE
Oil Cooler Hose Set, 84-85 SE, Stainless
You will also need:
11901 x 3
11902 x 1SKU: 11908 -
16mm CRUSH WASHER, COOLER & FRONT COVER ETC…
Oil Hose Washer, Small Cooler & Front Cover
The 16mm crush washer is used in many places, notably the oil cooler adapters on 79-85 front mounted oil coolers and for the oil cooler hose adapter in the front cover of all 79-92.
SKU: 41-6000-9956 Manufacturer SKU: 9956-41-600 -
ADAPTER -10 18MM THREAD, 86+ COOLER & ALL REAR HOUSING
Adapter -10, 18mm Thread, 86+ Cooler & All Rear Housing
SKU: 11902 -