Converter to Muffler Connecting Pipe
-
CONNECTING PIPE, 83-85 RX7 (WILL WORK FOR 81-82)
CONNECTING PIPE, 83-85 RX7 (WILL WORK FOR 81-82)
If using for 81-82 you must use 83-85 muffler
Connecting Pipe Section
1983-85 RX-7We offer a replacement connecting pipe section for the pipe section located between the primary (monolith) catalytic and muffler unit. The Racing Beat connecting pipe section is produced using mandrel-bent 2″ OD thick-wall stainless steel tubing and utilizes laser-cut stainless-steel flanges. Also included is separate hanger bracket to support the forward end of the connecting pipe. Although the stock rubber hangers can be reused, we strongly suggest replacing old, worn rubber hangers with new hangers to ensure correct chassis alignment of the exhaust system.
Installation Notes:
– This connecting pipe is NOT supplied with mounting positions for the stock heat shield. The heat shield cannot retained on this application.
– This connecting pipe is NOT supplied with a mounting position for the “Exhaust Temperature Sensor” unit. This sensor is used to monitor exhaust temperature and will signal a dash warning light if exhaust temperature exceeds a predetermined limit. This sensor can be eliminated or re-positioned away from the exhaust.
SKU: 16203 -
EXHAUST CONNECTING PIPE 84-85 12A MANUAL TRANS—NLA—
Sorry, this item has been discontinued by Mazda
Exhaust Connecting Pipe 84-85 12A Manual Transmission
SKU: 40-200C-N249 Manufacturer SKU: N249-40-200C -
EXHAUST CONNECTING PIPE, 81-82—NLA—
EXHAUST CONNECTING PIPE, 81-82
Sorry, this item has been discontinued by Mazda.
SKU: 40-2000-1480 Manufacturer SKU: 1480-40-200 -
EXHAUST CONNECTING PIPE, 83—NLA—
EXHAUST CONNECTING PIPE, 83
Sorry, this item has been discontinued by Mazda
SKU: 40-2000-N231 Manufacturer SKU: N231-40-200 -
EXHAUST CONNECTING PIPE, 84-85 12A AUTOMATIC TRANS—NLA—
EXHAUST CONNECTING PIPE, 84-85 12A AUTOMATIC TRANSMISSION
Sorry, this item has been discontinued by Mazda.
SKU: 40-200D-N250 Manufacturer SKU: N250-40-200D -
EXHAUST CONNECTING PIPE, GSLSE 13B—NLA—
EXHAUST CONNECTING PIPE, GSLSE 13B
Sorry, this item has been discontinued by Mazda.
SKU: 40-200B-N304 Manufacturer SKU: N304-40-200B -
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206 -
EXHAUST MUFFLER GASKET, 04-11 RX8 PIPE to CATALYTIC CONVERTER
Exhaust Muffler Gasket, 04-11 RX8 Muffler Pipe to Catalytic Converter
SKU: 40-5810-L315 Manufacturer SKU: L315-40-581