OIL PUMP, 04-08 RENESIS
Oil Pump, 04-08 Renesis
SKU: | 14-100A-N3H1 |
Manufacturer SKU: | N3H1-14-100A |
OIL PUMP, 04-08 RENESIS
$103.82
Related Products:
-
ENGINE FRONT COVER, OIL PUMP KEY
Oil Pump Key, Engine Front Cover
SKU: 14-119B-0839 Manufacturer SKU: 0839-14-119B -
OIL RELIEF VALVE, ADJUSTABLE, COMPETITION
OIL RELIEF VALVE, ADJUSTABLE, COMPETITION
The High Performance Rear Oil Pressure Regulator interchanges exactly with the stock rear oil pressure regulator on all 1971-2008 12A, 13B, and 20B engines. This oil pressure regulator is designed to bypass at 105-115 PSI. (Pressure this high should be used only for racing). When using this regulator, the front pressure regulator should be shimmed an 1/8-inch to ensure that it does not limit the oil pressure (shims included).
As a general rule, oil pressure should be increased as the horsepower output and engine RPM increases. As horsepower and RPM demands increase, it is beneficial to have higher oil pressure between the shafts and bearings to prevent possible catastrophic contact between spinning components. Additionally, as oil pressure is increased, flow rate also increases – hence, more oil is available to cool the bearings and rotors.
Tech Notes:
– The 1993-95 13B Twin Turbo the factory rear oil pressure regulator bypasses at a maximum nominal rate of 110 PSI.
-The 2004-2008 RX-8 Renesis engine factory rear oil pressure regulator bypasses at a maximum nominal rate of 80 PSI.
– The 2009-2011 RX-8 Renesis engine is not equipped with a rear pressure regulator. Nominal oil maximum oil pressure on this application is 110-115 PSI. We do not offer a regulator to increase the oil pressure on this application.
SKU: 11812 -
Eccentric Shaft Oil Jet – .200 – COMPETITION
Eccentric Shaft Oil Jet – .200 – Competition
This oil jet replaces the factory checkball and spring.
SKU: 11-4110-8553 Manufacturer SKU: 8553-11-411 -
Front Pulley Bolt Spring 86-11 Eccentric Shafts
Front Pulley Bolt Spring for 1986-2011 Eccentric Shafts
SKU: 11-D170-N326 Manufacturer SKU: N326-11-D17 -
-
FRONT COVER GASKET, 04-08 RX8
Front Cover Gasket, 04-08 RX8
SKU: 10-502B-N3H1 Manufacturer SKU: N3H1-10-502B