RACE STEERING ANGLE, TAPER STUD (EACH)
Race Steering Angle Taper Stud (Each)
SKU: | R-SAK-STUD |
RACE STEERING ANGLE, TAPER STUD
Tapered end goes into steering arm and heim joint slips over other end for Steering Angle Kit and Bumpsteer Kit.
$32.95
Related Products:
-
RACE STEERING ANGLE, RACK COUPLER (MALE-FEMALE)
Race Steering Angle Rack Coupler (Male-Female)
For our Steering Angle Kit. Screws into the steering rack to allow more steering angle. Two needed per car. Will NOT work without doing other things to allow correct alignment.
SKU: R-SAK-RACKEND -
RACE BUMPSTEER KIT, LONG COUPLING NUT
Race Bumpsteer Kit, Long Coupling Nut
For our Bumpsteer Kit. Couples the steering rack end to the heim joint on our Bumpsteer Kit Stud.
Threaded M14x2.0 for the hiem joint, M12x1.25 for the tie rod and is 3″ longSKU: R-BSK-COUP-L -
TIE ROD END, 86-92 OUTER
Outer Tie Rod End, 86-92
2 Needed per CarClick Here for Tie Rod End Castle Nut
SKU: 32-2800-FB01 Manufacturer SKU: FB01-32-280 -
RACE STEERING ANGLE, COUPLING NUT (F-F)
Race Steering Angle Coupling Nut (F-F)
For our Steering Angle Kit. Connects the rack steering arm to the heim joint on the stud.
Threaded M14x2.0 for the hiem joint, M12x1.25 for the tie rod and is 1-3/8″ longSKU: R-SAK-COUP-S -
RACE STEERING ANGLE, HEIM JOINT 14X2.0 MM
Race Steering Angle Heim Joint 14×2.0 mm
14mm Heim for our Steering Angle kit and our Bumpsteer kit. Goes over the stud and threads into the coupler. About 1/2″ of the threads need to be cut off before installation.
SKU: R-SAK-HEIM