SUSPENSION SPRING RUBBER, 86-92 FRONT UPPER

Related Products:

• 

  SUSPENSION SPRING FRONT & REAR SET, 86-92 RX7 COUPE RACING BEAT

  Racing Beat Front & Rear Spring Set, 86-92 RX7 Coupe
  Lowers approx 1″

  Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1986-91 RX-7 (except convertible) by Racing Beat’s engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.

  These springs have been designed with a rate increase of approximately 20% (front – 156 lb/in) and 20% (rear – 128 lb/in) with a modest drop of 1-inch (front and rear).

  If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a “springy” and bouncy ride. If you prefer to keep the ride quality of your car more “stock like”, you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, KYB, or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.

  SKU:

  14081

  $338.36
  Add to cart
• 

  SHOCK UPPER MOUNT, 86-92 REAR

  

  Rear Upper Shock Mount, 86-92 

  SKU:	28-0500-FB01
  Manufacturer SKU:	FB01-28-050

  $41.86
  Add to cart
• 

  SUSPENSION LOWERING KIT, 86-92 STRUT TOP

  SUSPENSION LOWERING KIT, 86-92 STRUT TOP
  Will not fit vehicles with auto adjust suspension

  The RX-7 Front Suspension Lowering Kit utilizes Racing Beat-modified Mazda OE top strut mounts to lower the front of the 1986-1992 RX-7 approximately 3/4-inch, without adversely affecting wheel travel or ride comfort. This kit is not intended for use on vehicles equipped with the original “Auto Adjust Suspension” components.

  SKU:

  14000

  $338.36
  Add to cart
• 

  SUSPENSION SPRING FRONT & REAR SET, 86-92 RX7 CONVERTIBLE RACING BEAT

  Racing Beat Front and Rear Spring Set, 86-92 RX7 Vert
  Lowers approx. 1/2″

  Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1986-91 RX-7 Convertible by Racing Beat’s engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.

  These springs have been designed with a rate increase of approximately 20% (front – 139 lb/in) and 20% (rear – 134 lb/in) with a modest drop of 1/2-inch (front and rear).

  If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a “springy” and bouncy ride. If you prefer to keep the ride quality of your car more “stock like”, you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, KYB, or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.

  SKU:

  14082

  $338.36
  Add to cart
• 

  STRUT BOOT/BUMPSTOP, 86-92 FRONT

  

  Front Strut Boot/Bumpstop, 86-92 

  SKU:	34-111A-FB01
  Manufacturer SKU:	FB01-34-111A

  $75.33
  Add to cart
• 

  STRUT TOP MOUNT, 86-92

  

  Strut Top Mount, 86-92

  These OEM strut tops are sold individually, but we recommend replacing them in pairs. The difference in height between an old compressed mount and a fresh new mount can be significant.

  SKU:	34-380C-FB01
  Manufacturer SKU:	FB01-34-380C

  $142.18
  Add to cart