DIFF LSD DISC S4 TURBO, WITH OUTSIDE PIN OUTER (6)—NLA—
DIFF LSD DISC S4 TURBO, WITH OUTSIDE PIN OUTER (6)
Sorry, this item has been discontinued by Mazda.
| SKU: | 27-2660-P020 |
| Manufacturer SKU: | P020-27-266 |
DIFF LSD DISC S4 TURBO, WITH OUTSIDE PIN OUTER (6)
$0.00
Related Products:
-
DIFF LSD THRUST WASHER, 81-88 NON TURBO (USES 2)
Limited Slip Differential Thrust Washer, 81-88 Non Turbo
(USES 2)SKU: 27-2520-M020 Manufacturer SKU: M020-27-252 -
DIFF LSD THRUST WSHR, 81-88 +.2MM (USES 2)
Limited Slip Differential Thrust Washer, 81-88 +.2mm
(USES 2)Use this high performance part for stronger lockup. Interchange this thicker part
to create a thicker stack, which will have a higher clamping force.SKU: 27-2530-M020 Manufacturer SKU: M020-27-253 -
DIFF LSD DISC 81-88, NON TURBO WITH OUTSIDE PINS-NEED4
Limited Slip Differential Disc 81-88, Non Turbo With Outside Pins
Uses 4SKU: 27-2580-M020 Manufacturer SKU: M020-27-258 -
DIFF LSD DISC 86-88 TURBO, WITH INSIDE PINS +.1MM 4 REQUIRED
DIFF LSD DISC 86-88 TURBO, WITH INSIDE PINS +.1MM 4 REQUIRED
Use this high performance part for stronger lockup. Interchange this thicker part
to create a thicker stack, which will have a higher clamping force.SKU: 27-2570-P020 Manufacturer SKU: P020-27-257 -
DIFF LSD THRUST WASHER, 86-88 TURBO +.2MM 2 REQUIRED
Limited Slip Differential Thrust Washer, 86-88 Turbo +.2mm
2 RequiredUse this high performance part for stronger lockup. Interchange this thicker part
to create a thicker stack, which will have a higher clamping force.SKU: 27-2540-P020 Manufacturer SKU: P020-27-254 -
DIFF LSD DISC 81-88, NON TURBO WITH INSIDE PINS-NEED 4
Limited Slip Differential Disc 81-88, Non Turbo With Inside Pins
Uses 4SKU: 27-2560-M020 Manufacturer SKU: M020-27-256
You May Also Like:
-
DIFF LSD THRUST WASHER, TB +.1MM—NLA—
DIFF LSD THRUST WASHER, TB +.1MM
Sorry, this item has been discontinued by Mazda.
SKU: 27-2530-P020 Manufacturer SKU: P020-27-253 -
DIFF PINION BEARING, REAR -85
Differential Rear Pinion Bearing 73–85
SKU: 27-2100-0221 Manufacturer SKU: 0221-27-210 -
CV BOOT KIT, 86-92 TURBO INNER
Inner CV Boot Kit, 86-92 Turbo
SKU: 22-540A-M040 Manufacturer SKU: M040-22-540A -
DIFF STUB SHAFT, N/A, S4 ALL, S5 OPEN—NLA—
Differential Stub Shaft
Fits all 86-88 non-turbo – both open and limited slips.
Also fits 89-92 non-turbo OPEN diffs (non-LSD).
Sorry, this item has been discontinued by Mazda
SKU: 27-270C-M055 Manufacturer SKU: M055-27-270C -
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DRIVESHAFT, 86-92 N/A WITH TURBO TRANSMISSION
Aftermarket Driveshaft, 86-92 Non-Turbo CAR with Turbo Transmission Swapped in, still using the non-turbo differential
SKU: 2691-799