SUSPENSION LOWERING KIT, 86-92 STRUT TOP
SUSPENSION LOWERING KIT, 86-92 STRUT TOP
Will not fit vehicles with auto adjust suspension
The RX-7 Front Suspension Lowering Kit utilizes Racing Beat-modified Mazda OE top strut mounts to lower the front of the 1986-1992 RX-7 approximately 3/4-inch, without adversely affecting wheel travel or ride comfort. This kit is not intended for use on vehicles equipped with the original “Auto Adjust Suspension” components.
SKU: | 14000 |
SUSPENSION LOWERING KIT, 86-92 STRUT TOP
$338.36
Related Products:
-
STRUT KYB AGX FRONT, 86-92 RIGHT
KYB AGX Adjustable Front Right Strut, 86-92
Front Left AGX Strut #733013
Rear AGX #741025SKU: 733012 -
SHOCK UPPER MOUNT, 86-92 REAR
Rear Upper Shock Mount, 86-92
SKU: 28-0500-FB01 Manufacturer SKU: FB01-28-050 -
STRUT TOP MOUNT, 86-92
Strut Top Mount, 86-92
These OEM strut tops are sold individually, but we recommend replacing them in pairs. The difference in height between an old compressed mount and a fresh new mount can be significant.
SKU: 34-380C-FB01 Manufacturer SKU: FB01-34-380C -
SUSPENSION SPRING FRONT & REAR SET, 86-92 RX7 CONVERTIBLE RACING BEAT
Racing Beat Front and Rear Spring Set, 86-92 RX7 Vert
Lowers approx. 1/2″Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1986-91 RX-7 Convertible by Racing Beat’s engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.
These springs have been designed with a rate increase of approximately 20% (front – 139 lb/in) and 20% (rear – 134 lb/in) with a modest drop of 1/2-inch (front and rear).
If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a “springy” and bouncy ride. If you prefer to keep the ride quality of your car more “stock like”, you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, KYB, or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.
SKU: 14082 -
SHOCK MOUNT UPPER, SPRING SEAT 86-92 REAR
Rear Upper Shock Mount Spring Seat 86-92
SKU: 28-0400-FB01 Manufacturer SKU: FB01-28-040 -
STRUT BOOT/BUMPSTOP, 86-92 FRONT
Front Strut Boot/Bumpstop, 86-92
SKU: 34-111A-FB01 Manufacturer SKU: FB01-34-111A