1972
Engine
-
ENGINE FRONT COVER, FRONT BOLT WASHER
Front Engine Cover, Front Hub Bolt Crush Washer
SKU: 22-8000-9956 Manufacturer SKU: 9956-22-800 -
ENGINE FRONT COVER, OIL PUMP KEY
Oil Pump Key, Engine Front Cover
SKU: 14-119B-0839 Manufacturer SKU: 0839-14-119B -
ENGINE FRONT COVER, THRUST BEARING 70-92
Front Engine Cover, Thrust Bearing 70-92
Two needed per engineSKU: 11-505B-0813 Manufacturer SKU: 0813-11-505B -
ENGINE FRONT COVER, THRUST PLATE 70-92
Engine Front Cover, Thrust Plate 70-92
This is the first “thing” onto the front of the eccentric shaft. It has a chamfer that sits against the radius on the eccentric shaft front.
SKU: 11-5040-1011 Manufacturer SKU: 1011-11-504 -
ENGINE FRONT COVER, THRUST WASHER 70-92
Front Engine Cover, Thrust Washer 70-92
This is the thin one that sits inside the front counterweight.SKU: 11-5070-1011 Manufacturer SKU: 1011-11-507 -
ENGINE STUD O-RING, FOR OS STUDS – EACH
Engine Stud O-Ring, For OS Studs – Each
Browse our 3 Rotor Engine Parts Catagory.
SKU: 014-V75 -
-
FLYWHEEL VW ADAPTER, FORMULA LIGHT 7.75LB
Replacement Flywheel for VW to Rotary Adapter Kit, Formula Light 7.75lb
SKU: 2670-FL -
FLYWHEEL VW ADAPTER, LIGHT WEIGHT 12.1LB
Replacement Flywheel for VW to Rotary Adapter Kit 12.1lb
SKU: 2670-L -
FLYWHEEL VW ADAPTER, STANDARD WEIGHT 17.1LB
Replacement Flywheel for VW to Rotary Adapter Kit, Standard Weight 17.1lb
SKU: 2670-S -
FREEZE PLUG LARGE, ALL FRONT & REAR HOUSING
1 3/16″ diameter Mazda OEM freeze plug for the larger holes front and rear side housings.
( uses 6-7 depending on year)
SKU: 63-0000-9930 Manufacturer SKU: 9930-63-000 -
FREEZE PLUG SMALL, FRONT HOUSING
Freeze Plug Small (3/4″ Diameter), Front Housing
(for front side housing, uses 1)SKU: 62-0000-9930 Manufacturer SKU: 9930-62-000 -
FRONT ENGINE MOUNT BOLT, PLATE TO FRONT COVER 72-85 (ea)
Front Engine Mount Bolt. Plate to Front Cover. 72-85 RX7 (ea)
SKU: 10-1015-0250 Manufacturer SKU: 0250-10-1015 -
FRONT MAIN OIL SEAL, ALL THRU 92
Front Main Oil Seal, All Through 92
SKU: 10-6050-0820 Manufacturer SKU: 0820-10-605 -
FRONT OIL PRESSURE REGULATOR PISTON 72-08
Front Oil Pressure Regulator Piston 72-08
Click Here for the Spring Used with this Piston
SKU: 14-1150-0839 Manufacturer SKU: 0839-14-115 -
HOSE OIL METERING, 72-85 CARB PER FOOT
Oil Metering Hose, 72-85, Carb., PER FOOT
We have found this hose to work well for the oil metering lines for early cars that do not use fittings on the line ends. This hose can be used stand-alone, it will push directly onto the nipples at the carb and the metering pump, OR it can be used to splice an OEM metering hose by pushing over the OEM plastic hose.
At this time the 12A OEM short hose is only one available for carbs. We typically will use two short OEM lines and cut one and extend it about two inches in the middle with this hose to make a long line.
This hose also works well to splice/repair any OEM injector line for all 70-11 rotary.
Sold by the foot.SKU: MOPHOSE-1 -
HYLOMAR TUBE, 1.5 OZ
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
SKU: HYLOMAR -
-
O-RING DOWEL PIN, ALL ROTARY
Dowel Pin, O-Ring All Rotary
SKU: 10-B730-N3A1 Manufacturer SKU: N3A1-10-B73 -
O-RING OIL CAP, ALL OEM 70-08
OEM Oil Cap O-Ring, All 70-08
SKU: 10-2520-8871 Manufacturer SKU: 8871-10-252