WEBER STUD, 8X1.25 45MM
Weber Stud, 8X1.25 45mm
Most of the Weber Manifolds do not include studs to hold the carb to the manifold. These 45mm ones work great when you are using spacers — measure to be sure these are what you need – depends on the spacer thickness.
| SKU: | AV11983 |
WEBER STUD, 8X1.25 45MM
$1.64
Related Products:
-
BOOK HAYNES WEBER MANUAL—NLA—
BOOK HAYNES WEBER MANUAL
We have discontinued this manual but it is available from Amazon or ebay.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 10240 -
WEBER PHENOLIC SPACER (EACH), 48 OR 51 IDA
Weber 48 or 51 IDA Phenolic Spacer
(Each)The Weber 48/51 IDA Phenolic Intake Spacers can be installed under a 48/51 IDA carburetor to increase the intake manifold length for special applications. Test have shown that up to three spacers per barrel can be used to move the torque peak down about 300 to 500 RPM per spacer. Each spacer is 10mm thick. Two spacers are required,sold individually. Gaskets are not included, but are available separately.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16621 -
WEBER NUT 8X1.25 WITH 10MM HEX
Weber Nut 8X1.25 With 10mm Hex
These are needed for the larger bore carbs as there is not enough room to get a 12mm wrench correctly on the base nuts.
These use a 10mm wrench which gives you room to tighten the nut.
Hard to find in “not jet nut” style and in steel. They can come in handy in many other places also.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 967-NUT -
WEBER IDA BASE GASKET, 3MM THICK
Weber IDA Base Gasket, 3mm Thick
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99005.123 -
WEBER FLOAT NEEDLE IDA, 3.0 MM
Weber Float Needle IDA, 3.0 mm
Rotary engines using IDA carbs need the largest float needle you can find. This 3.0 is the largest currently avialable.Weber IDA Float Needle Crush Washer
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 79504.300 -
WEBER STUD, 8X1.25 35MM
Weber Stud, 8X1.25 35mm
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: AV11981
You May Also Like:
-
VALVE BPAV, 86-88 TURBO —NLA—
VALVE BPAV, 86-88 TURBO
Sorry, this item has been discontinued by Mazda.
SKU: 20-6600-N332 Manufacturer SKU: N332-20-660 -
VALVE AIR CONTROL, 83 FEDERAL/CANADA –NLA–
VALVE AIR CONTROL, 83 FEDERAL/CANADA
Sorry, this item has been discontinued by Mazda.
1983 Only Without California emissionsSKU: 13-7200-N231 Manufacturer SKU: N231-13-720 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
BPAV GASKET, 86-88 ALL
Bypass Air Control Valve Gasket 86-88 All
SKU: 20-661A-N326 Manufacturer SKU: N326-20-661A -
VALVE VACUUM 1-WAY, GREEN/WHITE CHECK VALVE
1-Way Vacuum Check Valve, Green/White All RX7
SKU: 13-9950-HE41 Manufacturer SKU: HE41-13-995 -
VALVE VACUUM 1-WAY, 93-95 ALL METAL
1-Way Vacuum Valve, 93-95 All Metal
SKU: 13-8900-NF01 Manufacturer SKU: NF01-13-890