TRANSMISSION SPEEDOMETER GEAR, 86-92 FOR 4.375 RING & PINION
Speedometer Gear, 86-92 For 4.375 Ring & Pinion
| SKU: | 17-441A-1011 |
| Manufacturer SKU: | 1011-17-441A |
TRANSMISSION SPEEDOMETER GEAR, 86-92 FOR 4.375 RING & PINION
This gear is for the 89-92 GTUs and Turbo cars with the 4.375 rear end gear.
If swapping 4.375 gears into your car and using this gear to correct the speedometer, you will also need the gear housing SKU 17-442A-1011
$33.73
Related Products:
-
CABLE SPEEDOMETER, 86-92 ALL MANUAL
Speedometer Cable 86-92 All Manual, Except 89-92 Convertible
SKU: 60-070A-FB01 Manufacturer SKU: FB01-60-070A -
TRANSMISSION SPEEDOMETER GEAR, 86-92 ROLL PIN
Speedometer Gear Roll Pin, 86-92
SKU: 20-2140-9922 Manufacturer SKU: 9922-20-214 -
SEAL TRANSMISSION FRONT INPUT, 79-92 MANUAL ALL INCLUDING TURBO
Front Input Transmission Seal, 79-92 All Manual Transmission Including Turbo
SKU: 16-1030-0603 Manufacturer SKU: 0603-16-103 -
SEAL TRANSMISSION FRONT, 86-92 AUTOMATIC TRANS
Front Transmission Seal, 86-92 Automatic Transmission
SKU: 19-223A-0338 Manufacturer SKU: 0338-19-223A -
RING & PINION, 4.375 86-92 TURBO —NLA—
Mazda has discontinued this item.
OEM Ring & Pinion, 4.375 86-92 Turbo
SKU: 27-110B-P092 Manufacturer SKU: P092-27-110B -
TRANSMISSION SPEEDOMETER GEAR SLEEVE, 86-92 FOR 4.375
Speedometer Gear Sleeve, 86-92 4.375 Ring & Pinion
SKU: 17-442A-1011 Manufacturer SKU: 1011-17-442A
You May Also Like:
-
DIFF LSD CONE SPRING 81-88, -NEED 2
Limited Slip Differential Cone Spring 81-88,
Need 2SKU: 27-2590-M020 Manufacturer SKU: M020-27-259 -
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DIFF PINION BEARING, REAR -85
Differential Rear Pinion Bearing 73–85
SKU: 27-2100-0221 Manufacturer SKU: 0221-27-210 -
DIFF AXLE SEAL, 93-95 & RX8
Differential Axle Seal, 93-95 & RX8
SKU: 27-238A-P043 Manufacturer SKU: P043-27-238A -
DIFF CARRIER, 09-11 RX8
Differential Carrier, 09-11 RX8
Empty differential carrier. Does not include any gears, seals, differential, or pinion flange.
SKU: 27-1500-RA15 Manufacturer SKU: RA15-27-150 -
DIFF STUB SHAFT S5, NON TURBO LSD LEFT—NLA—
DIFF STUB SHAFT S5, NON TURBO LSD LEFT
Sorry, this item has been discontinued by Mazda.
SKU: 27-280B-M0B1 Manufacturer SKU: M0B1-27-280B