STUD WHEEL 3.25″, PRESS IN 84-11
3.25″ Press-in stud. Fits 84-85 GSLSE, 86-95, and RX8
All RX7 & RX8 Wheel Studs are 12MMX1.50 thread
| SKU: | 04-7905-0000 |
| Manufacturer SKU: | 0000-04-7905 |
STUD WHEEL 3.25″, PRESS IN 84-11
$5.75
Related Products:
-
STUD WHEEL, 86-92 RX7 FRONT (EACH)
OEM Front Press In 2″ Wheel Stud, 86-92 (Each)
All RX7 & RX8 Wheel Studs are 12MMX1.50 thread
SKU: 26-113A-FB05 Manufacturer SKU: FB05-26-113A -
LUG NUT 86-92 RX7 OPEN, OEM OPEN TOP 21MM
Lug Nut Open Top, 86-92 OEM 21mm with hub cap that covers lugs
SKU: 26-161A-0603 Manufacturer SKU: 0603-26-161A -
STUD WHEEL 2.5″, PRESS IN 84-11
2.5″ Press-in stud. Fits 84-85 GSLSE, 86-95 RX7 and 04-11 RX8
All RX7 & RX8 Wheel Studs are 12MMX1.50 thread
SKU: 04-7904-0000 Manufacturer SKU: 0000-04-7904 -
STUD WHEEL, 04-11 RX8 REAR PRESS IN
Rear Press In Wheel Stud, 04-11 (OEM) 1.625″
All RX7 & RX8 Wheel Studs are 12MMX1.50 thread
SKU: 33-0620-B455 Manufacturer SKU: B455-33-062 -
STUD WHEEL, 04-11 RX8 FRONT PRESS IN
Front Press In Wheel Stud, 04-11 (OEM) 1.687″
All RX7 & RX8 Wheel Studs are 12MMX1.50 thread
SKU: 33-0620-F151 Manufacturer SKU: F151-33-062 -
STUD WHEEL, 93-95 RX7 PRESS IN
OEM Press In Wheel Stud, 93-95 RX7 1 3/4″
All RX7 & RX8 Wheel Studs are 12MMX1.50 thread
SKU: 33-0620-J00Y Manufacturer SKU: J00Y-33-062
You May Also Like:
-
DRY SUMP KIT 13B, WITH DISTRIBUTOR HOLE—NLA—
DRY SUMP KIT 13B, WITH DISTRIBUTOR HOLE
Sorry, this item has been discontinued by Mazda.
SKU: 01-SUMP-9312-KT Manufacturer SKU: 9312-01-SUMP-KT -
LUG BOLT 81-85 12A — NLA —
Sorry, Mazda has discontinued this item.
Lug Bolt 81-85 12ASKU: 33-1650-1029 Manufacturer SKU: 1029-33-165 -
EXHAUST STUD, ROTARY HEADER STUD
Rotary Header Stud All 74-92
Stud, rotor housing for exhaust manifoldSKU: 10-1050-0839 Manufacturer SKU: 0839-10-105 -
RACE BUSHING DELRIN KIT, —NLA— 86-92 FRONT LOWER CONTROL ARM MAZDASPED
RACE BUSHING DELRIN KIT, 86-92 FRONT LOWER CONTROL ARM MAZDASPEED
This item is discontinued
SKU: 04-7401-0000-KT -
FLYWHEEL Mazdaspeed RACE 5.5″, FOR 5.5″ RACE CLUTCH NA–NLA–
Race Flywheel for 5.5″ Race Clutch. Fits all non-turbo diameter bell housings. (11.75 diameter and 116 tooth)
3.9 LBS
Accepts 5.5″ clutch ONLY
Our Hardware Kit #284063-HW-5.5 will NOT work on this flywheel. Customer must supply their own hardware for this flywheel.
When using this flywheel, you MUST modify your rear counterweight with additional holes and reduce hub diameter.Sorry, this item has been discontinued by Mazda
Click here for a templateSKU: 02-9207-0000 Manufacturer SKU: 0000-02-9207 -
ALTERNATOR LONG BOLT 86-11 RX7 RX8
ALTERNATOR LONG BOLT 86-11 RX7 RX8
Effective length, not counting head, is 105mm.
SKU: 01-0105-9980 Manufacturer SKU: 9980-01-0105