SILICONE TUBE, BLACK SILICONE, Aerosol Can
Black Silicone, Aerosol Can
We find this silicone extremely useful for all kinds of places.
We use it with gaskets and even in place of various gaskets.
| SKU: | GM-102 |
SILICONE TUBE, BLACK SILICONE, Aerosol Can
$21.45
Related Products:
-
ANTI-SEIZE, 8 OUNCE WITH BRUSH
ANTI-SEIZE, 8 OUNCE WITH BRUSH
HIGHLY recommended for spark plug threads about every time you put them in. As the name implies it keeps the plugs (and many other things) from seizing.
SKU: ANTI-SEIZE -
GREASE SYNTHETIC, NEO Z-12
Synthetic Grease, NEO Z-12
Really great synthetic grease for wheel bearings, etc. We have used it for many years.SKU: NEO-GREASE -
HYLOMAR TUBE, 1.5 OZ
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
SKU: HYLOMAR -
JBWELD, Epoxy
JBWELD, Epoxy
JB WELD is a two-part epoxy for repairing, or building up metal. We use it in many different places – for filling ports when building peripheral engines, building up runners inside intake manifolds, backfilling behind ports when we know we will break through to the water jacket, filling EGR passages in center housings, etc. It is an extremely versatile material that adheres great to just about anything solid. It is very easy to sand or grind after it hardens, and can easily be built up in layers. Remains pliable for about 20 minutes after mixed (but can flow where you don’t want it for a few hours), requires overnight to harden. The best “tool” we have found for applying it is popsicle sticks. Each box contains two 5 oz tubes – one of the JB material, and one of hardener.
Astounding number of uses. We use it to fill the intake ports when prepping side housings for peripheral intake engines. as well as many other places. 2-part epoxy.
SKU: JBWELD -
GASGACINCH, 8OZ CAN W/BRUSH
GASGACINCH, 8OZ CAN W/BRUSH
Great for sealing gaskets – 8oz. can with brush
SKU: GASGACINCH -
KEEP COOL, 8 OZ
Keep Cool, 8 OZ
Radiator additive to help keep the temperature down.
Works great – we have used it in our race and street cars for many years.SKU: KC-8OZ
You May Also Like:
-
L.S.D. GEAR OIL ADDITIVE
L.S.D. GEAR OIL ADDITIVE
If you get a “chatter” from the rear axle when starting from a stop, and turning at the same time, you need to add this additive to your rear end oil. This is due to the clutches in the differential locking and un-locking. The Limited Slip Additive assists with the applying and releasing of the clutch plates. One container/part number needed per rear end oil change.
For clutch type limited slips – all OEM’s through 1988. The later ones are either viscous or Torsen type and do not require additive.
SKU: ADDITIVE -
