RX8 OIL CHANGE KIT, IDEMITSU 20W-50 + OIL FILTER + OIL DRAIN PLUG + WASHER

RX8 Oil Change Kit, Includes 5 Quarts Idemitsu 20W-50 + RX8 Oil Filter + Oil Drain Plug + Drain Plug Washer

SKU: OCK-RX8-20W-50+FILTER+PLUG+WASHER

RX8 OIL CHANGE KIT, IDEMITSU 20W-50 + OIL FILTER + OIL DRAIN PLUG + WASHER

$88.04


Related Products:

  • Premix EZ Premier Kit

    Premix EZ Premier Kit

    Premix EZ Premier Kit

    2 (16 oz.) Measuring Bottles, 1 Funnel, 1 Quart Premix, Large Carrying Case, 1 Shop Towel
    You can order additional Idemitsu Premix here:

    1 Quart
    2 Quarts
    4 Quarts
    6 Quarts
    12 Quarts (Case)

    Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.

    A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.

    This kit is designed for an easy way to carry your premix.  The one quart of premix (included) fits in the two 16oz. bottles.  Also included is a funnel and a cloth shop towel. All in a convenient clear carrying case so you can see exactly what you have. Plus everything is in one place in your trunk. The approximate dimensions of this case are 14″x11″x3″

    Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.

    This kit includes:

    2 (16 oz.) Measuring Bottles
    1 Funnel
    1 Quart Premix
    Large
    Carrying Case
    1 Shop Towel

    Our Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.

    SKU: EZ-Premier-Kit
    $35.52
    Add to cart
  • OIL 20W-50 IDEMITSU CASE

    Idemitsu Oil 20W-50 Case – Per 12qt Case

    Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.

    • With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
    • Allows for better sealing of the chamber, facilitating more power generation
    • Extends the life of turbochargers by reducing bearing coking
    • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
    • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
    • Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
    • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
    SKU: IDE-20W-50-CS
    $153.67
    Add to cart
  • OIL 20W-50 IDEMITSU 1 Quart

    OIL 20W-50 IDEMITSU 1 Quart

    Idemitsu Oil 20W-50 1 Quart

     

    Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.

    • With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
    • Allows for better sealing of the chamber, facilitating more power generation
    • Extends the life of turbochargers by reducing bearing coking
    • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
    • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
    • Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
    • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
    SKU: IDE-20W-50
    $13.97
    Add to cart
  • Premix EZ Quick Kit

    Premix EZ Quick Kit

    Premix EZ Quick Kit

    This kit includes:

    2 (16 oz.) Measuring Bottles
    1 Funnel
    Small Carrying Case
    1 Shop Towel


    You can order Idemitsu Premix here:

    1 Quart
    2 Quarts
    4 Quarts
    6 Quarts
    12 Quarts (Case)

    Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.

    A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.

    Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.

    This kit is designed for an easy way to carry your premix.  One quart of premix fits in the two 16oz. bottles.  Also included is a funnel and a cloth shop towel. All in a convenient clear carrying case so you can see exactly what you have. Plus everything is in one place in your trunk. The approximate dimensions of this case are 10″x10″x3″.

    Our Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.

    SKU: EZ-Quick-Kit
    $26.69
    Add to cart
  • OIL FILTER K&N, ALL INCLUDING RX8

    OIL FILTER K&N, ALL INCLUDING RX8

    K&N Oil Filter, ALL Including RX8

    SKU: HP-1008
    $19.98
    Add to cart