OIL PUMP, 78-85 WITH HARDENED GEAR SET—NLA—

Related Products:

• 

  OIL RELIEF VALVE, ADJUSTABLE STREET

  OIL RELIEF VALVE, ADJUSTABLE STREET

  The Racing Beat high performance Rear Oil Pressure Regulator is designed for use on all 1971-1992 12A, 13B, and 20B engines and interchanges exactly with the stock unit. As supplied by Mazda, the factory pressure regulator is intended to bypass at maximum nominal rate of 71.1 PSI. For use on higher performance street applications the Racing Beat regulator can be substituted, which bypasses at a higher maximum nominal rate of 80-85 PSI.

  As a general rule, oil pressure should be increased as the horsepower output and engine RPM increases. As horsepower and RPM demands increase, it is beneficial to have higher oil pressure between the shaft and bearings to prevent possible catastrophic contact between spinning components. Additionally, as oil pressure is increased, flow rate also increases – hence, more oil is available to cool the bearings and rotors.

  SKU:

  11810

  $164.01
  Add to cart
• 

  ENGINE FRONT COVER, OIL PUMP KEY

  

  Oil Pump Key, Engine Front Cover

  SKU:	14-119B-0839
  Manufacturer SKU:	0839-14-119B

  $7.50
  Add to cart
• 

  OIL PUMP, 74-85 12A and 13B 17MM

  

  OEM Oil Pump, 74-85 13B + 12A 17mm.
  This is the pump we used for ALL 12A’s — much better than the original 15mm.

  SKU:	14-1000-8553
  Manufacturer SKU:	8553-14-100

  $306.51
  Add to cart
• 

  OIL PUMP CHAIN, 74-85 ALL—NLA—

  

  Oil Pump Chain, 74-85 All

  Sorry, this item has been discontinued by Mazda

  SKU:	14-1420-0839
  Manufacturer SKU:	0839-14-142

  $49.44
  Read more
• 

  OIL RELIEF VALVE, ADJUSTABLE, COMPETITION

  OIL RELIEF VALVE, ADJUSTABLE, COMPETITION

  The High Performance Rear Oil Pressure Regulator interchanges exactly with the stock rear oil pressure regulator on all 1971-2008 12A, 13B, and 20B engines. This oil pressure regulator is designed to bypass at 105-115 PSI. (Pressure this high should be used only for racing). When using this regulator, the front pressure regulator should be shimmed an 1/8-inch to ensure that it does not limit the oil pressure (shims included).

  As a general rule, oil pressure should be increased as the horsepower output and engine RPM increases. As horsepower and RPM demands increase, it is beneficial to have higher oil pressure between the shafts and bearings to prevent possible catastrophic contact between spinning components. Additionally, as oil pressure is increased, flow rate also increases – hence, more oil is available to cool the bearings and rotors.

  Tech Notes:

  – The 1993-95 13B Twin Turbo the factory rear oil pressure regulator bypasses at a maximum nominal rate of 110 PSI.

  -The 2004-2008 RX-8 Renesis engine factory rear oil pressure regulator bypasses at a maximum nominal rate of 80 PSI.

  – The 2009-2011 RX-8 Renesis engine is not equipped with a rear pressure regulator. Nominal oil maximum oil pressure on this application is 110-115 PSI. We do not offer a regulator to increase the oil pressure on this application.

   

  SKU:

  11812

  $164.01
  Add to cart
• 

  OIL RELIEF VALVE, 74-92 STOCK 60LBS

  

  Oil Pressure Regulator, 74-92 Stock 60lbs

  SKU:	14-2500-3648
  Manufacturer SKU:	3648-14-250

  $46.92
  Add to cart