WEBER MANIFOLD IDA for 84-85 13B 6-PORTS
Racing Beat Weber IDA Manifold for 84-85 13B 6-Ports
Note: This manifold does NOT have any hole or fitting for the brake servo hose.
If you want to use the servo then drill and tap a 1/8 NPT (pipe thread) hole somewhere convenient in the rear manifold runner (PRIOR to installation).
Use a straight or 90 degree 5/16″ (8mm) fitting.
| SKU: | 16492 |
WEBER MANIFOLD IDA for 84-85 13B 6-PORTS
Manifold for 84-85 6-port style 13B’s using a 48-52IDA or a throttle body with the IDA bolt pattern.
If you have a GSLSE simply use the 12A throttle cable and our linkage piece.
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
$376.53
Related Products:
-
WEBER GASKET BASE, 48 IDA
Weber IDA Base Gasket, 48 IDA
(2) Needed per carbClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99005.035 -
INTAKE MANIFOLD GASKET, 13B 6-PORT 84-85
Intake Manifold Gasket, 13B 6-Port 84-85 GSLSE
SKU: 13-111A-N304 Manufacturer SKU: N304-13-111A -
WEBER INLET FITTING, AN -6 TO WEBER 12MM
-6 To Weber 12mm Inlet Fitting
All Weber IDA carbs come with a useless banjo fitting we have never figured out how to use (unless you tap it 1/8-pipe and use a “barb” fitting). This will replace the stock inlet fitting with -6AN so you can use braided hose.
The 12mm Stat-O-Seal is strongly recommended for this fitting — it is at: WEBER INLET SEAL, STAT-O-SEAL FOR 12MM
We also have a 90° fitting for 8mm / 5/16″ push on hose at: WEBER INLET FITTING for 8mm (5/16″) push on hoseClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 30606-M12D -
WEBER SHAFT LEVER, 48+51IDA MAZDA CABLE
Weber Shaft Lever, 48+51 IDA Mazda Cable
For “U.S. Style” manifolds – where the cable pulls from BELOW shaft.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 444.614-04 -
CABLE THROTTLE, 79-85 12A
Throttle Cable, 79-85 12A
This WAS discontinued by Mazda BUT we are having them made for us.
The replacement is made using a combo of another MAZDA cable and modifications to it.
Click Here for a Weber 48IDA Suggested Parts List
SKU: 41-6600-FA01 Manufacturer SKU: FA01-41-660 -
WEBER 48 IDA, CARBURETOR ONLY
Weber 48IDA Carburetor
Be sure to look at our Weber Parts Category for many miscellaneous needed parts.
Weber Parts
Click Here for a Weber 48IDA Suggested Parts List
SKU: C-WEBER-48IDA
You May Also Like:
-
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741 -
BPAV GASKET, 86-88 ALL
Bypass Air Control Valve Gasket 86-88 All
SKU: 20-661A-N326 Manufacturer SKU: N326-20-661A -
AIR FILTER K&N, 79-85 EXCEPT GSLSE —NLA—
Sorry, this item has been discontinued by K&N
Air Filter K&N , 79-85 Except GSLSE
SKU: E2700 -
VALVE BPAV, 86-88 TURBO —NLA—
VALVE BPAV, 86-88 TURBO
Sorry, this item has been discontinued by Mazda.
SKU: 20-6600-N332 Manufacturer SKU: N332-20-660 -
AIR FILTER HOUSING, RACING BEAT STOCK W/O FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531 -
WEBER IDA IDLE JET HOLDER 120
Weber IDA Idle Jet Holder 120
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77903.120
Reviews
There are no reviews yet.