Astounding number of uses. We use it to fill the intake ports when prepping side housings for peripheral intake engines. as well as many other places. 2-part epoxy.
JB WELD is a two-part epoxy for repairing, or building up metal. We use it in many different places – for filling ports when building peripheral engines, building up runners inside intake manifolds, backfilling behind ports when we know we will break through to the water jacket, filling EGR passages in center housings, etc. It is an extremely versatile material that adheres great to just about anything solid. It is very easy to sand or grind after it hardens, and can easily be built up in layers. Remains pliable for about 20 minutes after mixed (but can flow where you don’t want it for a few hours), requires overnight to harden. The best “tool” we have found for applying it is popsicle sticks. Each box contains two 5 oz tubes – one of the JB material, and one of hardener.
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
Add to cart