WATER JACKET O-RING for Intake Manifold
Water Jacket O-Ring for Intake Manifold
We tested / looked at aftermarket O-rings but never found any that worked as well as these Mazda OEM ones.
We recommend using new ones anytime you are installing your intake manifold.
Needed on 1970 – 1992 non-6-port engines. This includes all the 86-92 Turbo rotor housings in case you are using those in another engine combo.
| SKU: | 13-1130-8527 |
| Manufacturer SKU: | 8527-13-113 |
WATER JACKET O-RING for Intake Manifold
$7.56
Related Products:
-
INTAKE MANIFOLD GASKET, 13B 4 PORT 74-75 W/SLOT
Intake Manifold Gasket, 13B 4 Port 74-75 All With Slot
SKU: 13-111C-1757 Manufacturer SKU: 1757-13-111C -
GASKET SET, RX7 89-92 TURBO —NLA—
Gasket Set, RX7 89-92 Turbo
Mazda has discontinued this set
SKU: 10-2710-8DF6 Manufacturer SKU: 8DF6-10-271 -
INTAKE MANIFOLD GASKET, 89-92 TURBO
Intake Manifold Gasket, 89-92 Turbo
SKU: 13-111A-N370 Manufacturer SKU: N370-13-111A -
INTAKE MANIFOLD GASKET, 12A 76-80
Intake Manifold Gasket, 12A 76-80
RX-3,7, Manifold to EngineSKU: 13-111B-3743 Manufacturer SKU: 3743-13-111B -
GASKET SET, RX7 81-82 12A —NLA—
GASKET SET, RX7 81-82 12A
Sorry, this item has been discontinued by Mazda.
SKU: 89-100A-N201 Manufacturer SKU: N201-89-100A -
INTAKE MANIFOLD GASKET, 13B 76-78
Intake Manifold Gasket, 13B 76-78
SKU: 13-111B-3648 Manufacturer SKU: 3648-13-111B
You May Also Like:
-
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531 -
VALVE VACUUM 1-WAY, GREEN/BLACK
1-Way Vacuum Valve, Green/Black All RX7
Arrow on body points to green endSKU: 13-995A-N390 Manufacturer SKU: N390-13-995A -
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741 -
WEBER IDA IDLE JET HOLDER 120
Weber IDA Idle Jet Holder 120
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77903.120