EXHAUST PRE-SILENCER GASKET, RACING BEAT TURBO 3″

Racing Beat Exhaust Pre Silencer Gasket, Turbo 3″
Gasket for 16192 Flage

 

SKU: 16340

EXHAUST PRE SILENCER GASKET, RB TURBO 3″

This 3″ ID exhaust gasket (80mm) can be used on the following Racing Beat components:

RX-7 Muffler (and connecting pipe)
This exhaust gasket can be used between the muffler and connecting pipe on the 1993-95 RX-7 Racing Beat Exhaust System (Part No. 16426, 16427).

REV TII Turbo Exhaust System
This gasket can be used on several of the components for the Racing Beat REV TII Complete TURBO II Exhaust System. This includes the down pipe section (rear) and presilencer section (front and rear).

RX-8 Muffler
This exhaust gasket can be used between the muffler and connecting pipe on the Racing Beat exhaust system for the 2004-2011 RX-8.

$13.94


Related Products:

  • EXHAUST SYSTEM, 86-92 TURBO

    EXHAUST SYSTEM, 86-92 TURBO

    Racing Beat Exhaust System, 86-92 Turbo

    1987-91 RX-7 TURBO REV II Complete High Performance Exhaust System – If you own a TURBO II RX-7 and you’ve found your way to this webpage, congratulations! Why? Because your search for an exhaust system for your car ends here. Simply put, this is the ultimate exhaust for any Turbo II RX-7!

    The REV TII High Performance RX-7 Exhaust is legendary with FC3S owners.  This RX-7 exhaust system includes a 3-inch OD REV TII Down Pipe from the turbo outlet that mates to a REV TII Presilencer section. The outlet of the presilencer connects to the inlet of the REV TII Y-Pipe which routes the exhaust gases down two 2.375-inch OD (60mm) pipes into a pair of left and right REV TII Power Pulse Mufflers. Once installed, this bolt-on exhaust system increases horsepower approximately 32% – that’s a 59 HP increase on a 1987 Turbo II RX-7!

    The REV TII High Performance RX-7 Exhaust system reduces exhaust gas back-pressure significantly, thereby allowing the un-assisted turbo boost pressure to increase to 10-11 psi. (Note: A fuel cut controller device is required to prevent fuel cutoff to the rear rotor above the factory pre-set limit.)

    This bolt-on system uses the stock mounting points for ease of installation. Each system is supplied with all necessary mounting hardware and gaskets. (The kit does not include turbo outlet gasket, if needed it can be ordered separately.) The down pipe section is provided with a position for the oxygen sensor.

    SKU: 16425
    $1,473.50
    Add to cart
  • MUFFLER RX8 04-08, RACING BEAT

    MUFFLER RX8 04-08, RACING BEAT

    MUFFLER RX8 04-08, RACING BEAT

    Power Output

    Utilizing in-house dyno test facilities, the Racing Beat engineering staff has undertaken exhaust system extensive testing with the RX-8 Renesis engine. Their research has found that simply adding a large-diameter, “straight-through” muffler is very loud, and power gains are only modest. They focused their development efforts on optimizing the power output, while maintaining a moderate, but aggressive exhaust tone.

    Based upon our initial test sessions, it appeared that the Mazda engineers did not leave much “untapped” horsepower behind in the stock exhaust system. Although it appears there might be modest power gains available from a “cat-back” exhaust system, be wary of big horsepower claims from any aftermarket exhaust system.

    Racing Beat’s testing has provided the following results:

    Stock production engine – with muffler removed +5 HP
    Stock production engine – with RB muffler + 3.5 HP
    Stock production engine – with aftermarket system “A” muffler + 3.5 HP
    Stock production engine – with aftermarket system “B” muffler + -1.5 HP

     

    SKU: 16397
    $982.33
    Add to cart
  • MUFFLER 93-95 RB, DUAL STAINLESS TIP WITH PIPE

    MUFFLER 93-95 RACING BEAT, DUAL STAINLESS TIP WITH PIPE

    Racing Beat Dual Stainless Tip Exhaust System Muffler With Pipe 93-95 

    Over the years Racing Beat has been amazed at just how many of these systems they’ve sold for the 1993-95 RX-7! Considering the rather small number of 1993-95 RX-7’s that were sold in the US, they thought that certainly the sales of these mufflers would have been rather modest. Man, were they wrong! After selling hundreds and hundreds of these systems it left them thinking as to why their Racing Beat system has proven to be so popular over the years. Comparison with other available systems revealed that other systems featured large exaggerated muffler tips and a louder, more aggressive exhaust tone as compared to the Racing Beat exhuast  system. The Racing Beat systems offered for the third-generation RX-7 have featured either an OEM-style Dual Tip or a modestly-sized Single Tip configuration, and a mellow, deep tone. With this classic combination of great looks, great sound, and great performance its no wonder why the Racing Beat system has been at the top of the heap for so long! If you’re in the need of a replacement system for your RX-7, follow the lead of those before you and give the Racing Beat system a try!

    SKU: 16427
    $828.31
    Add to cart
  • MUFFLER 93-95 RACING BEAT, SINGLE STAINLESS TIP WITH PIPE

    MUFFLER 93-95 RACING BEAT, SINGLE STAINLESS TIP WITH PIPE

    Racing Beat Single Stainless tip Muffler With Pipe, 93-95 

    Over the years Racing Beat has been amazed at just how many of these systems they have sold for the 1993-95 RX-7! Considering the modest number of 1993-95 RX-7’s that were sold in the US, they never thought that their systems would be a big seller. Man, were they wrong! Now, after selling 1000’s of these systems it left them thinking as to why their Racing Beat system has proven to be so popular with RX-7 owners. Comparison with available systems revealed that other systems featured large exaggerated muffler tips and a louder, more aggressive exhaust tone as compared to the Racing Beat exhaust  system. The Racing Beat systems we offer for the third-generation RX-7 have featured either an OEM-style Dual Tip or a modestly-sized Single Tip configuration, and a mellow, deep tone. With this classic combination of great looks, great sound, and great performance its no wonder why the Racing Beat system has been at the top of the heap for so long! If you’re in the need of a replacement system for your RX-7, follow the lead of those before you and give the Racing Beat system a try.

    Racing Beat exhaust systems are designed as an emissions legal, cat-back, bolt-on system and utilize all existing mounting brackets and hangers. Beautifully manufactured from pre-polished 304 series 3-inch OD stainless steel tubing, the straight-thru design of this exhaust muffler has been designed to offer your RX-7 maximum turbo performance with a 12-13 horsepower gain. The heart of every Racing Beat exhaust system starts with the muffler canister. High temperature, compressed sound insulation material is wrapped around the core of every muffler canister to provide excellent noise suppression. Each muffler is finished with a highly polished, double-walled 4-inch OD stainless steel tip. If  you no longer have the Mazda factory-installed muffler rear mounting bracket, we also include our Racing Beat-manufactured stainless steel FD Muffler Rear Mounting Bracket with this exhaust system. Every system comes complete with all required mounting hardware and gaskets.

    SKU: 16426
    $764.03
    Add to cart
  • Discontinued

    FLANGE PRE-SILENCER, 3″ TURBO —NLA—

    FLANGE PRE-SILENCER, 3″ TURBO

    Sorry, this item has been discontinued.

    SKU: 16192
    $0.00
    Read more
  • MUFFLER RX8, RACING BEAT "RACE"

    MUFFLER RX8, RACING BEAT “RACE”

    MUFFLER RX8, RACING BEAT “RACE”

    Power Output
    Performance gains are comparable with Racing Beat REV 8 Street Exhaust:

    Stock production engine – with muffler removed +5 HP
    Stock production engine – with RB street or race exhaust + 3.5 HP approx.

    Sound Quality
    While louder than the stock system, particularly under full throttle, this exhaust system can be used for those looking for a very aggressive exhaust tone for their daily-driven RX-8. A modest driving technique will produce a moderate and tolerable exhaust tone, but jump on the throttle and this exhaust really comes to life. Full throttle does not produce a buzzy or harsh, but a more exotic sound like that of a tuned V-6 engine. During a long-distance trip to the race track during prototype testing for this system, our independent test driver commented that highway cruising was very tolerable, without any droning sounds or harmonics.

    This exhaust system is equipped with a stainless steel connecting pipe and all required mounting hardware.

    *Measured approximately 50′ away from the side of an otherwise stock 2004 RX-8 MT under full throttle. Your actual decibel reading may vary. Other factors, including atmospheric conditions, additional performance accessories, tires, etc.. may cause variations in your actual sound measurement.

    SKU: 16396
    $812.54
    Add to cart