EXHAUST MANIFOLD TO CATALYTIC CONVERTER GASKET, 04-ON RX8 FRONT
EXHAUST MANIFOLD TO CATALYTIC CONVERTER GASKET, RX8 FRONT
| SKU: | 40-3050-N3H1 |
| Manufacturer SKU: | N3H1-40-305 |
EXHAUST MANIFOLD TO CATALYTIC CONVERTER GASKET, RX8 FRONT
$18.02
Related Products:
-
EXHAUST CATALYTIC CONVERTER REPLACE PIPE, 04-11 RX8
Racing Beat Catalytic Converter Replacement Pipe, 04-11 RX8
Racing Beat REN.V1 RX-8 Race Pipe
Each pipe comes complete with all required mounting hardware, gaskets, and installation instructions.
RX-8 Race Pipe – 2004-2011 RX-8 – Racing Beat offers a full 304-stainless steel catalytic converter replacement pipe for RX-8 racing applications. The weight of this pipe is 10 lbs. This mandrel-bent 3″ OD racing pipe is a direct bolt-on replacement for the stock catalytic converter section. This pipe utilizes a genuine OEM rear mounting flange for a secure fit to the stock (or an aftermarket) exhaust system. (See photo below.) The race pipe is equipped with a sensor fitting for the oxygen sensor. (Note: Placement of the sensor in the pipe will cause the “check engine” light to be illuminated, but performance and engine systems for racing applications will not be affected.) Removal of the OE catalytic converter/presilencer section will result in a noticeably louder exhaust tone.
SKU: 16201 -
EXHAUST MUFFLER GASKET, 04-11 RX8 PIPE to CATALYTIC CONVERTER
Exhaust Muffler Gasket, 04-11 RX8 Muffler Pipe to Catalytic Converter
SKU: 40-5810-L315 Manufacturer SKU: L315-40-581 -
EXHAUST CATALYTIC CONVERTER REPLACEMENT PIPE, 04-ON RX8 RESONATED
Racing Beat Catalytic Converter Resonated Replacement Pipe, 04-11 RX8
Racing Beat REN.V2 RX-8 Race Pipe
Resonated Catalytic Converter Replacement Race Pipe – RX-8 owners have discovered that a installing a non-resonated catalytic converter race pipe on a RX-8 can produce a surprising loud exhaust tone. If your racing application or local track requires a modest, quieter exhaust tone, then the Racing Beat REN.V2 resonated race pipe is the perfect solution.Racing Beat offers a 3″ OD fully stainless steel catalytic converter replacement pipe with dual resonators for RX-8 racing applications. Fitted with two (2) rotary-designed resonator units selected specifically for the RX-8 chassis. Each resonator is tightly packed with stainless steel wool for optimum sound supression and tone quality.
Both our resonated and non-resonated pipe versions are direct bolt-on replacements for the stock catalytic converter section. Racing Beat replacement pipes utilize a genuine Mazda OEM rear mounting flange to ensure a secure fitment to the stock (or an aftermarket) exhaust system. Each replacement pipe is equipped with a sensor fitting for the oxygen sensor. (Note: Placement of the sensor in the pipe will cause the “check engine” light to be illuminated, but performance and engine systems for racing applications will not be affected.)
Each race pipe comes complete with all required mounting hardware, gaskets, and installation instructions.
SKU: 16221 -
EXHAUST MUFFLER GASKET, FOR RACING BEAT RX8 SPLIT MUFFLER
Exhaust Muffler Gasket, For Racing Beat RX8 Exhaust
This donut style exhaust gasket can be used on Racing Beat RX-8 exhaust systems between the Racing Beat RX-8 connecting pipe section and the Racing Beat RX-8 muffler section. This gasket is not intended for use on the stock exhaust system. The id on this gasket is 3 1/8″ or 78mm
2004-2011 RX-8
This gasket is used at the connection between the Racing Beat RX-8 connecting pipe section and the Racing Beat RX-8 muffler section.SKU: 16343 -
EXHAUST MANIFOLD GASKET 04-11 RX8
Exhaust Manifold to engine. Mazda update for ’09 6-layer gasket
SKU: 13-461C-N3H1 Manufacturer SKU: N3H1-13-461C -
FLANGE ENGINE TO PIPE, RENESIS RACE
Engine to Pipe Flange, Renesis, Race
7/16″ thick steel flange for fabricating headersSKU: 16169
You May Also Like:
-
EXHAUST HEADER 12A, 79-85 RX7 DUAL OUTLET
Racing Beat 12A Exhaust Header, 79-85 RX7 Dual Outlet
SKU: 16125 -
EXHAUST HEADER 13B, 74-78 NO FLANGE EXCEPT PICK UP
Racing Beat 13B Exhaust Header, 74-78 No Flange. Will not work on the Pick Up
This rotary exhaust Header/Collector (less outlet flange) is ideal for RX-2, RX-3, RX-4, and COSMO (does not fit rotary pickup) custom exhaust installations. The flame-cut, .5-inch thick engine flange provides positive sealing and alignment. By integrating the collector with the header we reduce the effort and cost in completing the exhaust system. Engine-to-pipe gaskets are not included but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system.
If the stock resonator is eliminated during installation of this unit, we strongly recommend selecting a Power Pulse Presilencer and installing it in place of the resonator to maintain a pleasant noise level and character.
SKU: 16007 -
-
MUFFLER UNIVERSAL, POWER PULSE 79-85 RACING BEAT
Racing Beat Universal Power Pulse Muffler, 79-85
In response to numerous requests from customers demanding a very low restriction“street capable” muffler, Racing Beat now offers the Universal Power Pulse PR-Extreme RX-7 Muffler with a 2.75″ OD internal perforated core design to meet the performance demands of high-horsepower ported rotary engines. The Power Pulse PR-Extreme RX-7 Muffler is compatible with all 1979-85 RX-7 muffler rear mounting positions and retains the factory stock appearance; this PR-Extreme RX-7 Muffler includes an inlet of 3″.
The Racing Beat Universal Power Pulse PR-Extreme RX-7 Muffler is manufactured by the same exhaust components manufacturer that has produced the “tried and proven” First Generation RX-7 Power Pulse mufflers (1979-80, 1981-82, and 1984-85) since the mid-1980s. Utilizing a heavy-walled canister shell and extremely durable heat and noise insulating materials, the Racing Beat Power Pulse PR-Extreme RX-7 Muffler is engineered for the high exhaust gas temperatures found in rotary engine applications.
The main body of the muffler canister measures 8 inches in diameter and 18 inches in length. The dual outlet tips are completely chrome-plated with straight-cut outlet.
Now may be the time to consider replacing the old rubber muffler hangers on your RX-7. New replacement hangers will ensure correct alignment of the RX-7 muffler canister and tip position in the bumper opening.
SKU: 16436 -
EXHAUST CONVERTER GASKET 93-95 MAIN FRONT & REAR
Exhaust Converter Gasket 93-95 Front and Rear of Main
SKU: 40-3050-RF36 Manufacturer SKU: RF36-40-305 -
