EXHAUST PRE-SILENCER, 84-85 12A MANUAL TRANSMISSION
Racing Beat Exhaust Pre-Silencer, 84-85 12A Manual Transmission
| SKU: | 16401 |
EXHAUST PRE-SILENCER, 84-85 12A MANUAL TRANSMISSION
The Racing Beat Power Pulse Presilencer for the 1984-85 RX-7 12A engine (w/manual transmission) is designed to be used with our wide selection of RX-7 Streetable Headers to complete a bolt-on configuration. When used along with a Racing Beat header, this presilencer will connect the header to the connecting pipe section, offering a true bolt-on configuration. These Power Pulse Presilencers are also ideal for those individuals wanting to fabricate custom exhaust systems incorporating either long or short primary exhaust systems.
The Power Pulse Presilencer improves the character of the exhaust noise, dramatically reducing the inherent, obnoxious metallic high frequency noise with virtually no power loss. Constructed with a high temperature, 2-inch I.D. perforated core of 304 stainless steel wrapped with high-temperature stainless steel wool, the Power Pulse Presilencer measures 20 inches in length with a 4-inch outside diameter. The mounting hanger (if provided) has been designed to mount this presilencer to the specific application listed above. The mounting studs are 10mm both front and rear.
$291.06
Related Products:
-
EXHAUST CONVERTER GASKET, 81-85 MONO + 84-85(REAR)
81-85 Mono Converters Gasket, 84-85 Rear Main Converter Gasket
SKU: 13-621A-1480 Manufacturer SKU: 1480-13-621A -
EXHAUST HEADER 12A, 84-85 RX7 (MANUAL TRANSMISSION)
Racing Beat 12A Exhaust Header, 84-85 RX7 with Manual Transmission
Actual header not shown in photo – oxygen sensor fitting only included on 1984-85 RX-7 GSL-SE header.
The Racing Beat RX-7 Header is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer in all 1984-85 RX-7s (12A – Manual Transmission). The combination of this RX-7 exhaust header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters for use in racing applications, along with any intermediate pieces of tubing.
This RX-7 header assembly is constructed with .120-inch wall, mandrel-bend, mild steel tubing for increased durability. The engine-to-header flange is laser-cut from .5-inch thick steel plate to ensure positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed.
SKU: 16012 -
EXHAUST SYSTEM SINGLE, 84-85 12A MANUAL
Racing Beat Single Exhaust System, 84-85 12A with Manual Transmission
SKU: 16417 -
EXHAUST HANGER, 2 SLEEVES
Exhaust Hanger, 2 Sleeves
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-1600-1114 Manufacturer SKU: 1114-40-160 -
EXHAUST CENTER SECTION, 79-85 RACING BEAT 4 PORT/6 PORT
Racing Beat Exhaust Center Section, 79-85 4 Port/6 Port
SKU: 16398 -
You May Also Like:
-
EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85
Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
Will work on 6 Port if not using the actuators.SKU: 16423 -
EXHAUST STUD, RENESIS EXHAUST MANIFOLD TO ENGINE
Exhaust Stud Renesis, Exhaust Manifold to Engine (4 Required)
SKU: 13-708A-SL50 Manufacturer SKU: SL50-13-708A -
-
SPLIT AIR EXHAUST GASKET, —NLA— 79-80 HEAT EXCHANGER FRONT & REAR
Split Air Exhaust Gasket, 79-80 Split Air Pipe To Catalytic Converter
Heat Exchanger Front and RearSorry, this item has been discontinued by Mazda
SKU: 13-135B-8527 Manufacturer SKU: 8527-13-135B -
-
EXHAUST HEADER 13B, 79-92 4&6-PORT DUAL OUTLET
Racing Beat 13B Exhaust Header, 79-92 4&6-PORT DUAL OUTLET
SKU: 16127 Manufacturer SKU: 16127