EXHAUST PRE-SILENCER WITH DOWN PIPE, 89-92 N/A MAN TRANS
EXHAUST PRE-SILENCER WITH DOWN PIPE, 89-92 N/A MAN TRANS

EXHAUST PRE-SILENCER WITH DOWN PIPE, 89-92 NON TURBO MANUAL TRANSMISSION

Racing Beat Exhaust Pre-Silencer with Down Pipe, 89-92 Non Turbo Manual Transmission Coupe

Down Pipe with Presilencer – 1989-91 RX-7 Coupe Non-Turbo (equipped with Manual Transmission) – The 1986-92 13B 6-port engines, in stock form with the factory fuel injection, produces similar power gains with either our Header/Presilencer combo or our RX-7 Down Pipe/Presilencer combination. If you have no intentions of installing RB’s Holley intake System (or any other aftermarket carb set-up), we recommend the use of the RX-7 Down Pipe/Presilencer combo since it offers a slightly quieter exhaust note, is easier to install and less costly. If you are intending to upgrade the intake or fuel injection system, the Header/Presilencer combo offers the greatest performance potential.

The Down Pipe/Presilencer combination incorporates a 2.5-inch O.D. Down Pipe and our perforated stainless steel core and stainless steel wool-packed Presilencer to boost power approximately 13% – an 18 horsepower increase on a 1987 RX 7- and maintain a comfortable exhaust noise level during full power driving.

The replacement pipe connects to the factory exhaust manifold, and the presilencer connects to the factory Y-pipe, replacing all catalytic converters and intermediate tubing. It is not possible to use just the down pipe to replace only the catalytic converters. The use of the presilencer is required to complete the connection to the y-pipe. Although a short length of tubing can be substituted in place of the presilencer, we so not offer (or suggest) this due the unacceptable increase in exhaust noise.

The down pipe is equipped with a mounting flange for the oxygen sensor. This kit includes all necessary mounting hardware, air control & check valve cover plate, and gaskets (3 Replacement Pipe-to-Presilencer gaskets).

SKU: 16213

EXHAUST PRE-SILENCER WITH DOWN PIPE, 89-92 N/A MAN TRANS

 

$534.83

Related Products:

  • EXHAUST PRE-SILENCER, 89-92 N/A MANUAL TRANS

    EXHAUST PRE-SILENCER, 89-92 NON TURBO MANUAL TRANSMISSION

    Racing Beat Exhaust Pre-Silencer, 89-92 Non Turbo Manual Transmission

    SKU: 16408
    $310.46
    Add to cart
  • Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2"

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.

    This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.

    SKU: S16206
    $212.52
    Add to cart
  • EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT

    EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT

    EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT  Manual Transmission 

    Racing Beat offers the complete Full Stainless Steel Road Race RX-7 Exhaust System for the 1989-92 RX-7 (manual transmission). This completely Stainless Steel RX-7 exhaust system is intended for use on RX-7 applications running under the extremes of road racing, drag racing, or any high performance, high RPM application. The Racing Beat Full Stainless Steel RX-7 dual exhaust system has been designed to maximize the exhaust gas scavenging benefits while maintaining reasonable sound level outputs.

    NOTE: This exhaust system is not compatible for use on automatic transmission-equipped vehicles due to fitting tolerances with the larger AT bell housing.

    The following is included in this RX-7 exhaust system:

    1989-92 RX-7 Stainless Steel Road Race Header
    The Racing Beat Road/Race Header for the 1989-92 13B engine features Stainless Steel construction for excellent durability.

    Road Race Presilencer
    Mating to the outlet of the header is the Racing Beat Road Race Presilencer. The straight-through dual presilencer unit offers beneficial sound reducing qualities by trapping a significant level of the harsh rotary exhaust note.

    Road Race Y-Pipe
    The Racing Beat Y-Pipe section routes the exhaust gases exiting the presilencer section to each of the Power Pulse muffler units.

    Road Race Mufflers (Left and Right Pair)
    Sharing the same design technology as our Power Pulse muffler units, the Road/Race mufflers (Left and Right) feature all stainless steel construction for superior durability and appearance. Large diameter tubing routes the exhaust gas through each muffler unit, exiting through polished stainless steel tips.

    SKU: 16452
    $1,600.00
    Add to cart

You May Also Like:

  • EXHAUST PRE-SILENCER, 81-83

    EXHAUST PRE-SILENCER, 81-83

    Racing Beat Exhaust Pre-Silencer, 71-78, 81-83

    The Racing Beat Power Pulse Presilencer for the 1971-78 & 81-83 RX-7 is designed to be used with our wide selection of RX-7 Streetable Headers to complete a bolt-on configuration. These Power Pulse Presilencers are ideal for those individuals wanting to fabricate custom exhaust systems incorporating either long or short primary exhaust systems.

    The Power Pulse Presilencer improves the character of the exhaust noise, dramatically reducing the inherent, obnoxious metallic high frequency noise with virtually no power loss. Constructed with a high temperature, 2-inch I.D. perforated core of 304 stainless steel wrapped with high-temperature stainless steel wool, the Power Pulse Presilencer measures 20 inches in length with a 4-inch outside diameter. The mounting studs are 12mm both front and rear.

    SKU: 16400
    $291.06
    Add to cart
  • EXHAUST HEADER 12A, 79-85 RX7 DUAL OUTLET

    EXHAUST HEADER 12A, 79-85 RX7 DUAL OUTLET

    Racing Beat 12A Exhaust Header, 79-85 RX7 Dual Outlet

    SKU: 16125
    $375.95
    Add to cart
  • EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85

    EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85

    Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
    Will work on 6 Port if not using the actuators. 

    SKU: 16423
    $1,449.24
    Add to cart
  • MUFFLER UNIVERSAL, POWER PULSE 79-85 RACING BEAT

    MUFFLER UNIVERSAL, POWER PULSE 79-85 RACING BEAT

    Racing Beat Universal Power Pulse Muffler, 79-85 

    In response to numerous requests from customers demanding a very low restriction“street capable” muffler, Racing Beat now offers the Universal Power Pulse PR-Extreme RX-7 Muffler with a 2.75″ OD internal perforated core design to meet the performance demands of high-horsepower ported rotary engines.  The Power Pulse PR-Extreme RX-7 Muffler is compatible with all 1979-85 RX-7 muffler rear mounting positions and retains the factory stock appearance; this PR-Extreme RX-7 Muffler includes an inlet of 3″.

    The Racing Beat Universal Power Pulse PR-Extreme RX-7 Muffler is manufactured by the same exhaust components manufacturer that has produced the “tried and  proven” First Generation RX-7 Power Pulse mufflers (1979-80, 1981-82, and 1984-85) since the mid-1980s.  Utilizing a heavy-walled canister shell and extremely durable heat and noise insulating materials, the Racing Beat Power Pulse PR-Extreme RX-7 Muffler is engineered for the high exhaust gas temperatures found in rotary engine applications. 

    The main body of the muffler canister measures 8 inches in diameter and 18 inches in length. The dual outlet tips are completely chrome-plated with straight-cut outlet.

    Now may be the time to consider replacing the old rubber muffler hangers on your RX-7. New replacement hangers will ensure correct alignment of the RX-7 muffler canister and tip position in the bumper opening.

    SKU: 16436
    $430.53
    Add to cart