DRIVESHAFT OEM, RX8 MANUAL TRANSMISSION—NLA—
Sorry, this item has been discontinued by Mazda
OEM Driveshaft, RX8 Manual Transmission (Carbon Fiber 13.0 lbs)
| SKU: | 25-100E-PC01 |
| Manufacturer SKU: | PC01-25-100E |
Mazda OEM driveshaft for RX8 manual transmission
All Mazda OEM driveshafts from ’83 on have non-replaceable u-joints, When a u-joint wears out you need to replace the driveshaft. We suggest you check out our aftermarket shafts for your year all of which do have replaceable u-joints.
$0.00
Related Products:
-
U-JOINT NON OEM, FITS ALL WITH PART# 3191-
U-JOINT NON OEM, FITS ALL WITH PART# 3191-
For our aftermarket ALUMINUM drivshafts. Fits all our driveshafts that start with 3191.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 5-788X -
NUT DRIVE SHAFT, 86-11 RX7 & RX8
Drive Shaft Nut, 86-11 RX7 & RX8
SKU: 25-1240-1368 Manufacturer SKU: 1368-25-124 -
BOLT DRIVESHAFT, 86-11 RX7 & RX8
DriveShaft Bolt, 86-11 RX7 & RX8
SKU: 25-1230-P012 Manufacturer SKU: P012-25-123 -
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
For our aftermarket Steel drivshafts. Fits all our driveshafts that start with 2691.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 2651-60 -
DRIVESHAFT, 04-11 RX8 STEEL for MANUAL TRANSMISSION
New Aftermarket Steel Driveshaft, 04-11 RX8 Manual Transmission (18 lbs)
This is an aftermarket driveshaft for RX8’s with manual transmissions. It is much less expensive than a factory OEM shaft.
Note: The factory Mazda OEM driveshafts from 1983-on have non-replaceable U-joints — you have to buy a new driveshaft if they wear out.
The aftermarket driveshafts we offer are completely new, balanced and ready to install. They incorporate traditional replaceable u-joints so you can rebuild them if you ever wear them out.
SKU: 2691-708 -
DRIVESHAFT ALUMINUM, 04-11 RX8
New Aftermarket Aluminum Driveshaft for 04-11 RX8 (11.9 lbs)
Fits Manual Transmission cars only!
SKU: 3191-708A
You May Also Like:
-
DIFF BEARING, 86-92 RX7 PINION REAR
Differential Rear Pinion Bearing, 86-92
SKU: 27-2100-M025 Manufacturer SKU: M025-27-210 -
CV BOOT KIT, 86-92 RX7 TURBO INNER
Inner CV Boot Kit, 86-92 Turbo
SKU: 22-540A-M040 Manufacturer SKU: M040-22-540A -
DIFF KAAZ 2-WAY, 84-92 RX7 NON TURBO WPC COATED
KAAZ Limited Slip Differential 2-Way, 84-92 Non Turbo
WPC Coated (recommended for street use)SKU: DBZ1810-WPC-2 -
DIFF LSD CONE SPRING 81-88, -NEED 2
Limited Slip Differential Cone Spring 81-88,
Need 2SKU: 27-2590-M020 Manufacturer SKU: M020-27-259 -
DIFF TORSEN LSD, 84-92 RX7 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DIFF TORSEN LSD, FD & RX8—NLA—
DIFF TORSEN LSD, FD & RX8
Sorry, this item has been discontinued by Mazda
SKU: 27-200E-P099 Manufacturer SKU: P099-27-200E