DRIVESHAFT OEM, 86-92 TURBO—NLA—
DRIVESHAFT OEM, 86-92 TURBO
Sorry, this item has been discontinued by Mazda.
| SKU: | 25-100A-P039 |
| Manufacturer SKU: | P039-25-100A |
Mazda OEM driveshaft for 86-92 Turbo manual transmission RX7’s.
All Mazda OEM driveshafts from ’83 on have non-replaceable u-joints, When a u-joint wears out you need to replace the driveshaft. We suggest you check out our aftermarket shafts for your year all of which do have replaceable u-joints.
$0.00
Related Products:
-
-
-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
For our aftermarket Steel drivshafts. Fits all our driveshafts that start with 2691.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 2651-60 -
U-JOINT NON OEM, FITS ALL WITH PART# 3191-
U-JOINT NON OEM, FITS ALL WITH PART# 3191-
For our aftermarket ALUMINUM drivshafts. Fits all our driveshafts that start with 3191.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 5-788X -
DRIVESHAFT YOKE, RX7 Turbo & AutoTrans, RX8 Manual Trans
DRIVESHAFT YOKE, RX7 Turbo & AutoTrans, RX8 Manual Trans
Driveshaft Yoke
Fits our: 2691-799, 2691-705, 2691-706, 3191-799A, 3191-705A, 2691-2535
SKU: 2603-25
You May Also Like:
-
-
DIFF AXLE SEAL SIDE, 86-92 TURBO
Differential Side Axle Seal, 86-92 Turbo
SKU: 27-2380-P016 Manufacturer SKU: P016-27-238 -
RING & PINION, 4.778 SHORT NOSE 74-85
OEM Ring & Pinion, 4.778 Short Nose 74-85
Mazda will discontinue these soon. They still have some.
SKU: 27-1100-M057 Manufacturer SKU: M057-27-110 -
DIFF PINION SEAL, 86-92 TURBO
Differential Pinion Seal, 86-92 Turbo
SKU: 27-1650-P090 Manufacturer SKU: P090-27-165 -
DIFF SIDE CARRIER BEARING, 86-95 TURBO+RX8
Differential Side Carrier Bearing, 86-95 Turbo & RX8
SKU: 27-350A-0118 Manufacturer SKU: 0118-27-350A -
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1