CLUTCH THROW OUT BEARING, USE F853-16-510
CLUTCH THROW OUT BEARING, USE F853-16-510
| SKU: | 16-5100-LF01 |
| Manufacturer SKU: | LF01-16-510 |
CLUTCH THROW OUT BEARING, USE F853-16-510
Part number superseded to #F853-16-510
$0.00
Related Products:
-
CLUTCH PILOT SEAL, ALL ROTARY 74-ON
Clutch Pilot Seal, All Rotary 74-On
SKU: 11-404A-1881 Manufacturer SKU: 1881-11-404A -
PILOT BEARING REMOVER TOOL
Pilot Bearing Remover Tool
To remove the old pilot bearing the bearing MUST be gripped at its front end. Very few of the aftermarket pullers we tested were able to do this correctly. They often tended to destroy the bearing making removal even harder.
To use the tool simply insert the attachment into the bearing, being sure to get it to the end of the bearing, insert the tapered / threaded end of the slap hammer part and screw them together until the bearing is firmly gripped. Then just “slap hammer” it out. Should take less than a minute.
This tool prevents eccentric shaft damage when removing bearing.
This tool does fit other cars including Miata. We do not have a list of cars that it will work on. The RX pilot bearing/input shaft measures .588″. If your application also has a .588 shaft/bearing, this tool will work.SKU: 49-1285 -
CLUTCH PILOT BEARING, ALL ROTARY 74-ON
Clutch Pilot Bearing, All Rotary 74-11
SKU: 11-D030-N326 Manufacturer SKU: N326-11-D03 -
CLUTCH THROW OUT BEARING, S4 TURBO, S5 ALL, RX8 ALL
ClutchThrow Out Bearing, S4 Turbo, S5 All, RX8 All
SKU: 16-5100-F853 Manufacturer SKU: F853-16-510 -
CLUTCH DISC ALIGNMENT TOOL, TURBO, RX8
Clutch Disc Alignment Tool, Turbo RX7, RX8
Clutch alignment tools are needed whenever a clutch is installed. Damage to the clutch disc is almost assured if alignment is not correct.
SKU: 0033-03
You May Also Like:
-
REAR COUNTERWEIGHT 83-85 12A
Rear counterweight for 83-85 12A Engines — they have the “N” on the rotors
These were discontinued by Mazda — We are having them made.
We took a few pair of 83-85 12A rotors, weighed them all for an average, set the bobweights for those weights on a 12A eccentric shaft then we re-balance NEW 13B rear counterweights to match.
SKU: 11-751A-N226-MOD Manufacturer SKU: N226-11-751A-MOD -
-
FLYWHEEL RING GEAR, RX7 NON TURBO
Flywheel Ring Gear, RX7 Non Turbo
SKU: 11-7020-0866 Manufacturer SKU: 0866-11-702 -
CLUTCH DISC STREET/STRIP HEAVY DUTY, ALL ROTARY -82
Racing Beat Clutch Disc Street/Strip Heavy Duty , All Rotary up to 82
The 215mm Street/Strip HD (Heavy Duty) Disc for all 1971-82 12A & 13B Applications (except Rotary Pick-Up) is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate. The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate. As with all of our products, it is built only from new parts.
Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.
Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.
Actual disc not shown in photo.
SKU: 12509 -
CLUTCH MASTER, 79-80
Clutch Master, 79-80
Hose comes out straight upSKU: 41-4000-8593 Manufacturer SKU: 8593-41-400 -
CLUTCH FORK BOOT 86-92 TURBO
Clutch Fork Boot 86-92 Turbo
SKU: 16-2140-N302 Manufacturer SKU: N302-16-214