CLUTCH SLAVE HOSE, 04-11 HARD @ MASTER

You May Also Like:

• 

  CLUTCH DISC RACE, ALL ROTARY -82

  Racing Beat Race Clutch Disc, All Rotary up to 82, 4 puck

  The 4-Puck 215mm Race Clutch Disc is designed for drag and road race use with all 1971-82 12A & 13B Applications (except Rotary Pick-Up). The disc incorporates four (4) sintered copper pucks and a rigid hub for quick, positive engagement, greater fatigue resistance, and improved heat dissipation. The sharpened engagement/disengagement characteristics of this disc require careful driver attention – this disc is not intended for street use.

  Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

  Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

  Actual disc not shown in photo.

  SKU:

  12521

  $267.75
  Add to cart
• 

  CLUTCH MASTER, 78- 2/79 RX7

  

  Clutch Master, 78- 2/79 RX7
  Hose comes out slightly to the driver side

  SKU:	41-400A-8871
  Manufacturer SKU:	8871-41-400A

  $61.20
  Add to cart
• 

  CLUTCH FORK BOOT 74-92 NON-TURBO

  

  Clutch Fork Boot 74-92 Non-Turbo

  SKU:	16-214A-3975
  Manufacturer SKU:	3975-16-214A

  $19.43
  Add to cart
• 

  REAR COUNTERWEIGHT, —NLA— DUAL PATTERN MAZDA COMPETITION

  

  REAR COUNTERWEIGHT, DUAL PATTERN MAZDA COMPETITION

  Sorry, this item has been discontinued by Mazda.

  SKU:	01-9152-0000
  Manufacturer SKU:	0000-01-9152

  $0.00
  Read more
• 

  CLUTCH DISC SPORT/RACE, ALL-82 4 PUCK SPRUNG

  Racing Beat Sport/Race Clutch Disc, All up to 82 4 Puck Sprung

  SKU:

  12528

  $267.75
  Add to cart
• 

  REAR COUNTERWEIGHT 83-85 12A

  Rear counterweight for 83-85 12A Engines — they have the “N” on the rotors

  These were discontinued by Mazda — We are having them made. 

  We took a few pair of 83-85 12A rotors, weighed them all for an average, set the bobweights for those weights on a 12A eccentric shaft then we re-balance NEW 13B rear counterweights to match. 

  SKU:	11-751A-N226-MOD
  Manufacturer SKU:	N226-11-751A-MOD

  $317.43
  Add to cart