CLUTCH KIT STAGE 2, 86-92 TURBO + RX8 HEAVY DUTY
Clutch Kit Stage 2 Heavy Duty, 86-92 Turbo + RX8
Race performance
Exedy Stage 2
Race performance, Metal Puck Disc and Upgraded Pressure Plate
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment Tool
We open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: | 10952AHD |
Manufacturer SKU: | 10952AHD |
CLUTCH KIT STAGE 2, 86-92 TURBO + RX8 HEAVY DUTY
$920.08
Related Products:
-
CLUTCH KIT STAGE 2, 86-92 TURBO + RX8
Clutch Kit Stage 2, 86-92 Turbo+ RX8
Race performanceExedy Stage 2
Race performance, Metal Puck Disc and Upgraded Pressure Plate
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment ToolWe open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: 10952A Manufacturer SKU: 10952A -
CLUTCH KIT STAGE 1, 86-92 TURBO
Clutch Kit Stage 1, 86-92 Turbo
StreetSKU: 10803A Manufacturer SKU: 10803A -
FLYWHEEL ALUMINUM, TURBO,RX8 (Does NOT include rear counterweight)
Aluminum Flywheel, Turbo,RX8 (Does NOT include rear counterweight)
SKU: 11435 -
PILOT BEARING REMOVER TOOL
Pilot Bearing Remover Tool
To remove the old pilot bearing the bearing MUST be gripped at its front end. Very few of the aftermarket pullers we tested were able to do this correctly. They often tended to destroy the bearing making removal even harder.
To use the tool simply insert the attachment into the bearing, being sure to get it to the end of the bearing, insert the tapered / threaded end of the slap hammer part and screw them together until the bearing is firmly gripped. Then just “slap hammer” it out. Should take less than a minute.
This tool prevents eccentric shaft damage when removing bearing.
This tool does fit other cars including Miata. We do not have a list of cars that it will work on. The RX pilot bearing/input shaft measures .588″. If your application also has a .588 shaft/bearing, this tool will work.SKU: 49-1285 -
CLUTCH KIT STAGE 1, 86-92 TURBO + RX8 HEAVY DUTY
Clutch Kit Stage 1, 86-92 Turbo + RX8 Heavy Duty
Street/Strip performanceSKU: 10803AHD Manufacturer SKU: 10803AHD