CLUTCH COVER STREET/STRIP, 83-92 NON-TURBO

CLUTCH COVER STREET/STRIP, 83-92 N/A —NLA—

CLUTCH COVER STREET/STRIP, 83-92 NON-TURBO

Sorry, this item has been discontinued.

SKU: 12608

CLUTCH COVER STREET/STRIP, 83-92 NON-TURBO

The Exedy Street/Strip Pressure Plate, intended for the 1983-92 RX-7 12A & 13B (6-Port Non-Turbo) chassis, is designed for high-performance street applications and for occasional drag or road racing. A stronger diaphragm spring applies substantially more holding force (700 kg – 1544 lbs clamping load) to the clutch disc to avoid clutch slip under load. This RX-7 pressure plate interchanges exactly with the stock pressure plate, and can be used with the 225mm stock disc or any equivalent replacement aftermarket disc.

We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

$0.00

Related Products:

  • CLUTCH DISC STREET/STRIP HEAVY DUTY, 83-92 NON-TURBO

    CLUTCH DISC STREET/STRIP HEAVY DUTY, 83-92 NON-TURBO

    Racing Beat Street/Strip Clutch Disc Heavy Duty, 83-92 Non-Turbo

    The Street/Strip HD (Heavy Duty) 225mm Clutch Disc for the 1983-92 Non-Turbo RX-7s is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate.

    The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate.

    Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage. 

    Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

    Actual disc not shown in photo.

    SKU: 12510
    $278.25
    Add to cart
  • CLUTCH PILOT SEAL, ALL ROTARY 74-ON

    CLUTCH PILOT SEAL, ALL ROTARY 74-ON

    Clutch Pilot Seal, All Rotary 74-On

    SKU: 11-404A-1881
    Manufacturer SKU: 1881-11-404A
    $5.43
    Add to cart
  • PILOT BEARING TOOLS, INSTALLER & REMOVER

    PILOT BEARING TOOLS, INSTALLER & REMOVER

    Mazda Rotary Engine Pilot Bearing Tools Remover and Installer Kit

    SKU: KIT-PILOT-TOOLS
    $181.00
    Add to cart
  • CLUTCH PILOT BEARING, ALL ROTARY 74-11

    CLUTCH PILOT BEARING, ALL ROTARY 74-ON

    Clutch Pilot Bearing, All Rotary 74-11

    SKU: 11-D030-N326
    Manufacturer SKU: N326-11-D03
    $13.44
    Add to cart

You May Also Like: