WEBER AFTERMARKET 51IDA CARBURETOR
Weber Aftermarket 51 IDA Carburetor
Supplied with:
48 chokes, f7 tubes, 120 airs, 135 fuel, 0 bypass, 3.0 float needle
Most of the IDA manifolds we list are for 48IDA’s — when used with this 51IDA they will need to be ported to match the larger bore.
Click Here for a Weber IDA Suggested Parts List
Be sure to look at our Weber Parts Category for many miscellaneous needed parts.
Weber Parts
| SKU: | 16603 |
WEBER AFTERMARKET 51IDA CARBURETOR
$585.00
Related Products:
-
WEBER MANIFOLD for Early 13B 4-PORT 48 IDA
Weber Manifold Early 13B 4-Port 48 IDA
Does not come with Intake Manifold GasketClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16484 -
FILTER AIR CANISTER, 48 IDA WITH K&N SHORT
Air Canister Filter for 48 IDA With K&N Short Filter
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 56-1210 -
WEBER IDA MANIFOLD for 13B 6-PORT 84-92
Racing Beat Weber IDA Manifold for 13B 6 Port 84-92
Note: This manifold does NOT have any hole or fitting for the brake servo hose.
If you want to use the servo then drill and tap a 1/8 NPT (pipe thread) hole somewhere convenient in the rear manifold runner (PRIOR to installation).
Use a straight or 90 degree 5/16″ (8mm) fitting.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16493 -
WEBER MANIFOLD IDA for 93-95 13B Engines
Racing Beat Weber IDA Manifold for 93-95 13B Engines
48/51+ IDA 1993-95 13B 4-Port Engine or any 13B engine assembled using ’93-95 “Turbo” side housings. Also for any throttle body with an IDA bolt pattern.Note: This manifold does NOT have any hole or fitting for the brake servo hose.
If you want to use the servo then drill and tap a 1/8 NPT (pipe thread) hole somewhere convenient in the rear manifold runner (PRIOR to installation).
Use a straight or 90 degree 5/16″ (8mm) fitting.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16495
You May Also Like:
-
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE AIR CONTROL, —NLA— 84-85 12A
VALVE AIR CONTROL, 84-85 12A
Sorry, this item has been discontinued by Mazda.
SKU: 13-720B-N251 Manufacturer SKU: N251-13-720B -
PURGE VALVE, 79-92—NLA—
Purge Valve, 79-92
Sorry, this item has been discontinued by Mazda
SKU: 20-950A-1480 Manufacturer SKU: 1480-20-950A -
VALVE VACUUM DELAY, GREEN/BLACK
Vacuum Delay Valve Green/Black. Arrow on body points to black end
SKU: 20-3090-8574 Manufacturer SKU: 8574-20-309 -
VALVE AIR CONTROL, 83 FEDERAL/CANADA –NLA–
VALVE AIR CONTROL, 83 FEDERAL/CANADA
Sorry, this item has been discontinued by Mazda.
1983 Only Without California emissionsSKU: 13-7200-N231 Manufacturer SKU: N231-13-720 -
VALVE AIR CONTROL, 86-88 NON TURBO MANUAL TRANS
Air Control Valve, 86-88 Non Turbo Manual Transmission
SKU: 13-9900-N326 Manufacturer SKU: N326-13-990