BOTTLE RADIATOR OVERFLOW, 86-92 Early
Radiator Overflow Bottle, 86-92
Fits Early 86-88 Vin number ending before xx129445
| SKU: | 15-350A-N326 |
| Manufacturer SKU: | N326-15-350A |
BOTTLE RADIATOR OVERFLOW, 86-92 Early
Please look at the pictures or check your vin# to determine which bottle your car uses.
$92.45
Related Products:
-
WATER LEVEL SENSOR SEAL 79-95
Water Level Sensor Seal 79-95
For Coolant level sensorSKU: 15-6110-8553 Manufacturer SKU: 8553-15-611 -
BOTTLE RADIATOR OVERFLOW, 86-92
Radiator Overflow Bottle, 86-92
Fits Late Vin # after xxx129445
SKU: 15-350C-N332 Manufacturer SKU: N332-15-350C -
RADIATOR CAP, 86-08 (INCL RX8)
Radiator Cap, 86-08 (Including RX8)
SKU: 15-2050-D316 Manufacturer SKU: D316-15-205 -
WATER LEVEL SENSOR, 79-92
Water Level Sensor, 79-92
Does not include Seal**Note: The 89-92 Sensors are outrageously expensive. The only difference between the 79-88 and the 89-92 is the electrical connector. If the connector is simply changed over (it’s just male/female bullet), then the much less expensive 79-88 one works fine.
SKU: 15-610B-8553 Manufacturer SKU: 8553-15-610B
You May Also Like:
-
HOSE WATER RX8, THERMOSTAT TO TANK UPPER
Water Hose, RX8, Thermostat Cover to Tank / Upper
SKU: 15-380A-N3H1 Manufacturer SKU: N3H1-15-380A -
HOSE HEATER, 79-82 PIPE TO RADIATOR—NLA—
Heater Hose, 79-82, Pipe To Radiator
Sorry, this item has been discontinued by Mazda
SKU: 61-2130-8871 Manufacturer SKU: 8871-61-213 -
SWAY BAR MOUNT FRONT, 93-95 RX7 RIGHT OEM
Sway Bar Mount, Front, 93-95, Right OEM
SKU: 34-160F-FD01 Manufacturer SKU: FD01-34-160F -
RADIATOR CAP NECK, 86-88 WITH OUT OVER FLOW TUBE—NLA—
Radiator Cap Neck, 86-88, Without Over Flow Tube
Sorry, this item has been discontinued by Mazda.
You can use the radiator cap neck with over flow tube N326-15-17YA and cap the tube with a 8mm cap, which you can order here
SKU: 15-17Y0-N323 Manufacturer SKU: N323-15-17Y -
RADIATOR ALUMINUM, 79-82 RACE 4-PASS
Radiator Aluminum, 79-82 Race 3 ROW 4-Pass
Please note – the mounting holes in the flanges are NOT drilled — allows you to position the radiator where YOU want it.
Core is 18″ wide x 15″ tall x 2 1/2″ thick, 21 3/4″ across tanks, 27 1/8″ across flanges.
Hose inlet / outlets are 40mm — uses 1 1/2″ hoses. Supplied with cap — uses “small” diameter cap like our #D316-15-205
This is a “race” radiator – the water level sensor hole is NOT there.
It DOES have the 79-82 style oil cooler mount bosses — for mounting the oil cooler below the radiator.
There may or may not be bosses and captive nuts on the backside for mounting radiator shroud or fans.
SKU: RAD-79-82-HP -
HOSE HEATER, 09-11 REAR HOUSING TO FIREWALL
Heater Hose, 09-11, Rear Housing To Firewall
SKU: 61-24XA-F189 Manufacturer SKU: F189-61-24XA