BELLHOUSING BOLT, 93-95 RX7 AUTOMATIC TRANSMISSION LOWER LEFT

You May Also Like:

• 

  REAR COUNTERWEIGHT 83-85 RX7 12A

  Rear counterweight for 83-85 12A Engines — they have the “N” on the rotors

  These were discontinued by Mazda — We are having them made. 

  We took a few pair of 83-85 12A rotors, weighed them all for an average, set the bobweights for those weights on a 12A eccentric shaft then we re-balance NEW 13B rear counterweights to match. 

  SKU:	11-751A-N226-MOD
  Manufacturer SKU:	N226-11-751A-MOD

  $322.24
  Add to cart
• 

  TRANSMISSION MOUNT REAR, ALL 74-85 RX7 (EXCEPT 84-85 RX7 AUTO)

  

  Rear Transmission Mount, All 74-85 Except 84-85 Automatic Trans

  SKU:	39-340A-1011
  Manufacturer SKU:	1011-39-340A

  $56.31
  Add to cart
• 

  CLUTCH FORK BOOT 86-92 RX7 TURBO

  

  Clutch Fork Boot 86-92 Turbo

  SKU:	16-2140-N302
  Manufacturer SKU:	N302-16-214

  $36.49
  Add to cart
• 

  CLUTCH DISC RACE, ALL ROTARY -82

  Racing Beat Race Clutch Disc, All Rotary up to 82, 4 puck

  The 4-Puck 215mm Race Clutch Disc is designed for drag and road race use with all 1971-82 12A & 13B Applications (except Rotary Pick-Up). The disc incorporates four (4) sintered copper pucks and a rigid hub for quick, positive engagement, greater fatigue resistance, and improved heat dissipation. The sharpened engagement/disengagement characteristics of this disc require careful driver attention – this disc is not intended for street use.

  Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

  Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

  Actual disc not shown in photo.

  SKU:

  12521

  $267.75
  Add to cart
• 

  CLUTCH DISC STREET/STRIP HEAVY DUTY, ALL ROTARY -82

  Racing Beat Clutch Disc Street/Strip Heavy Duty , All Rotary up to 82

  The 215mm Street/Strip HD (Heavy Duty) Disc for all 1971-82 12A & 13B Applications (except Rotary Pick-Up) is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate. The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate. As with all of our products, it is built only from new parts.

  Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

  Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

  Actual disc not shown in photo.

   

  SKU:

  12509

  $267.75
  Add to cart
• 

  TRANSMISSION MOUNT REAR, 74-85 COMPETITION

  

  Rear Transmission Mount, 74-85 All Manual Transimission, Competition

  SKU:	39-3400-4352
  Manufacturer SKU:	4352-39-340

  $210.23
  Add to cart