APEX SEAL SIDE PIECE, HAS ROUNDED EDGE 79-85
Mazda OEM apex seal corner piece for 79-85 3mm apex seals.
| SKU: | 11-302A-N201 |
| Manufacturer SKU: | N201-11-302A |
APEX SEAL SIDE PIECE, HAS ROUNDED EDGE 79-85
Note: The original OEM apex seals 74-76? had the corner piece with a squared-off tip that sat completely below the apex seal. This apex seal has a square end and is longer. The later (78-85) triangular piece has a rounded tip, and sits along the apex seal such that it is actually the last part of the seal length. This apex seal has a rounded end. These two types are NOT interchangeable. The early style is very rare, and all the APEX SEALS we sell are the later type. We have always strongly recommended buying NEW apex seals, in which case this entire discussion is not needed
$5.39
Related Products:
-
-
ROTOR KIT, 12A 74-85
ROTOR KIT, 12A 74-85
All parts that go on the rotors — for a 2 rotor engine.
Includes the following parts:
6 Apex Seal N201-11-300B
6 Apex Seal Spring 1011-11-304B
4 Rotor Oil Seal Pair N3Z1-11-S10A
4 Rotor Side Oil Seal 1202-11-343
4 Rotor Side Oil Seal 0820-11-341
12 Corner Seal N225-11-321
12 Corner Seal Rubber N201-11-322
12 Corner Seal Spring NF01-11-C24
2 Side Oil Seal Spring N225-11-351
2 Side Oil Seal Spring 1011-11-353A
2 Side Oil Seal Spring N225-11-361
2 Side Oil Seal Spring 1011-11-363A
12 Side Seal Spring 0820-11-317
12 Side Seal 1011-23-151APicture of product is a generic picture.
SKU: MZTX-12-ROTOR -
CORNER SEAL, ALL ROTARY 76-85 (and all) with 3mm Apex Seals
CORNER SEAL, ALL ROTARY 76-85 (and all) with 3mm Apex Seals, This OEM corner seal does not come with the rubber insert – it must be purchased separately.
Corner Seal Rubber for 74-85 w/3mm Apex Seals
SKU: 11-3210-N225 Manufacturer SKU: N225-11-321 -
CORNER SEAL SPRING, 72-92
This is the “early wire type” corner seal spring.
We recommend using the “later” flat type spring for all Rotary engines from 95 on back.
Click here for the later type of spring
SKU: 11-323A-1202 Manufacturer SKU: 1202-11-323A -
APEX SEAL SPRING, for 12A Rotors 74-85
Mazda OEM APEX SEAL SPRING, for 12A Rotors 74-85
SKU: 11-304B-1011 Manufacturer SKU: 1011-11-304B
You May Also Like:
-
SIDE SEAL 04-11, FITS V,W,X or Y SLOTS
Side Seal 04-11, Fits V,W,X,Y Slots
SKU: 11-C100-N3Z5 Manufacturer SKU: N3Z5-11-C10 -
EXHAUST TURBO GASKET, 93-95 REAR TURBO TO MANIFOLD
Exhaust Turbo Gasket, 93-95 Rear Turbo to Manifold
SKU: 13-7100-N3A1 Manufacturer SKU: N3A1-13-710 -
ENGINE FRONT COVER, DISTRIBUTOR DRIVE GEAR 04-08 RX8
Front Engine Cover, Distributor/ Crank Angle Sensor Drive Gear, 04-08 RX8
SKU: 11-D710-N3H1 Manufacturer SKU: N3H1-11-D71 -
FRONT COUNTERWEIGHT, 13B 04-11 MANUAL TRANSMISSION
Front Counterweight, 13B 04-11 Manual Transmission
SKU: 11-D6X0-N3Z3 Manufacturer SKU: N3Z3-11-D6X -
GASKET SET, RX8 04-08 6-PORT
GASKET SET, RX8 04-08 6-PORT
This kit contains all exterior gaskets.
You must use this O-Ring Gasket Set to assemble the motor.SKU: 10-S50C-N3Z3 Manufacturer SKU: N3Z3-10-S50C -
HOUSING REAR, 04-06 4-PORT AUTOMATIC TRANSMISSION
Housing Rear, 04-06 4-Port Automatic Transmission
SKU: 10-C500-N3H2 Manufacturer SKU: N3H2-10-C50