Tools & Templates
-
SPARK PLUG SOCKET TOOL SPECIAL SMALL DIAMETER
Spark Plug Socket Tool, Special Small Diameter
Some (most?) of the “earlier” spark plugs, and some of the “not specifically for Mazda Rotary” racing plugs have a short body, as can be seen in the pictures. With the eyebrow on the rotor housings around the spark plug holes, from 1981 on, normal spark plug sockets are prevented from gripping the spark plug.
The “eyebrow” blocking the spark can be seen in the picture.
This socket is specifically made with a smaller diameter on the end so it can get between the spark plug and the housing.
The tool is fairly thin there so be careful with it — SPARK PLUGS ONLY!
There is NO warranty and no returns on this — We know what will happen – the same thing that happened around here way too many times. We go to use it, it is broken, and NOBODY touched it. The problem is it is the same size (13/16, 21mm) as lug nuts. Somebody tried to take a wheel off!!
Best advice is lock it up after YOU use it!!SKU: 11529 -
Torque Multiplier Flywheel Nut Wrench 12A & 13B
Torque Multiplier Flywheel Nut Wrench 12A & 13B
Torque Multiplier Flywheel Nut Wrench Tool
This Racing Beat flywheel nut removal and tightening tool is great for both home and high-volume shop applications. Easy-to-use with a standard torque wrench and 1/2″ – 12pt socket, this tool can be use on either on both 12A and 13B rotary engines. Select the non-turbo or turbo flywheel application setting by quickly changing the position of the removable pinion gear.
Simply place the tool into position, engage the pinion gear over the ring gear, place the torque wrench socket over the pinion gear spline, and rotate until the wrench “clicks”. To use the tool to remove the flywheel nut, use a socket/breaker bar and repeat the produce by turning in the opposite direction.
The torque multiplying design of this tool will tighten the flywheel retaining nut to the correct 350 ft/lb specification by following the marked torque specifications located at the base of the selected pinion gear position.
BTW, the flywheel in the video/photos is a “junk” part, please don’t clamp your flywheel into a vice.
SKU: 22011
