General Hardware
-
CLUTCH RACE HARDWARE, FOR 5.5″ DOUBLE DISC
Race Clutch Hardware, For 5.5″ Double Disc Race Clutches using our Race Flywheels
SKU: 284063-HW-5.5 -
CLUTCH RACE HARDWARE, FOR 7.25″ TWIN DISC
Race Clutch Hardware, For use with 7.25″ Twin disc Clutches using our Race Flywheels
SKU: 298062-HW-725 -
DOWEL PIN 93-95 AUTO, REAR HOUSING TO STARTER
Rear Housing to Starter Dowel Pin 93-95 Automatic Trans
SKU: 41-2080-9923 Manufacturer SKU: 9923-41-208 -
DOWEL PIN FRONT & REAR STATIONARY GEAR TO HOUSING
Front and Rear Stationary Gear to Housing Dowel Pin
SKU: 10-2030-0839 Manufacturer SKU: 0839-10-203 -
DOWEL PIN SHORT, FRONT COVER & BELLHOUSING
Front Cover and Bellhousing Short Dowel Pin
SKU: 10-3090-1757 Manufacturer SKU: 1757-10-309 -
DRY SUMP ADAPTER #1, ALUMINUM AN -12
Aluminum AN Dry Sump Adapter #1, -12
SKU: 14-R960-ZR03 Manufacturer SKU: ZR03-14-R96 -
DRY SUMP ADAPTER #2, ALUMINUM AN -16
Aluminum Dry Sump Adapter #2, AN -16
SKU: 14-R980-ZR03 Manufacturer SKU: ZR03-14-R98 -
EGR EXPANSION PLUG, 86-88
EGR OEM freeze plug for 86-88 Non Turbo center housing – goes below intake ports.
SKU: 52-8000-9930 Manufacturer SKU: 9930-52-800 -
EXHAUST SLEEVE, TITANIUM 13B
EXHAUST SLEEVE, TITANIUM 13B
Works great to replace non-turbo 13B sleeves and 20B sleeves.
Browse our 3 Rotor Engine Parts Catagory.
SKU: EXH-SLEEVE-TI -
EXHAUST STUD 89-92, TURBO TO DOWNPIPE—NLA—
Exhaust Stud 89-92, Turbo To Downpipe
This item has been discontinued by Mazda
SKU: 13-7080-N370 Manufacturer SKU: N370-13-708 -
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179 -
FREEZE PLUG LARGE, ALL FRONT & REAR HOUSING
1 3/16″ diameter Mazda OEM freeze plug for the larger holes front and rear side housings.
( uses 6-7 depending on year)
SKU: 63-0000-9930 Manufacturer SKU: 9930-63-000 -
FREEZE PLUG SMALL, FRONT HOUSING
Freeze Plug Small (3/4″ Diameter), Front Housing
(for front side housing, uses 1)SKU: 62-0000-9930 Manufacturer SKU: 9930-62-000 -
FREEZE PLUG, ROTOR HOUSING @ INTAKE MANIFOLD
Freeze Plug, Rotor Housing @ Intake Manifold
SKU: 555-101 -
FRONT ENGINE MOUNT BOLT, PLATE TO FRONT COVER 72-85 (ea)
Front Engine Mount Bolt. Plate to Front Cover. 72-85 RX7 (ea)
SKU: 10-1015-0250 Manufacturer SKU: 0250-10-1015 -
FUEL DOOR BUMP STOP, 81-85 RX7, 93-95 RX7, & 04-11 RX8
Fuel Door Bump Stop (Two per Vehicle)
Fits 81-85 RX7
93-95 RX7
04-11 RX8SKU: 70-4910-0187 Manufacturer SKU: 0187-70-491 -
FUEL FILTER MOUNT, 86-92 (EACH)
Fuel Filter Mount, 86-92 (Each)
2 RequiredSKU: 13-3630-N236 Manufacturer SKU: N236-13-363 -
HYLOMAR TUBE, 1.5 OZ
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
SKU: HYLOMAR -
INTAKE MANIFOLD BOLT CENTER LONG 93-95 RX7–NLA–
INTAKE MANIFOLD BOLT, CENTER LONG 93-95 RX7
Sorry, this item has been discontinued by Mazda
SKU: 13-3660-NF01 Manufacturer SKU: NF01-13-366 -
LOWER STARTER BOLT AUTOMATIC 04-11 RX8
LOWER STARTER BOLT AUTOMATIC 04-11 RX8
SKU: 60-8350-9979 Manufacturer SKU: 9979-60-835