Balance parts needed when sending in rotating assembly to be balanced
This user was Dave's admin account. It was hacked 8/22/23. We changed it to
- no role for this site - Hoping this will block the hacker.
-
-
We have made many of these over many years. Easiest way to make a “custom” 2-into-1 collector to fit any of the 2-Outlet Headers we sell (made by Racing Beat). VERY easy to incorporate 2.5″, 3″ outlet tubing – or even bigger. Also VERY easy to “build in” angle / alignment changes. The one we […]
-
Back In Stock.Mazdatrix Windshield Banners3 1/2″ x 40″For 79-85 RX7’s For 86-92 RX7’s For 93-95 RX7’s For 04-11 RX8’s CONNECTING PIPE, 83-85 RX7 (WILL WORK FOR 81-82)Racing BeatIf using for 81-82 you must use 83-85 muffler STRUT TOWER BRACE 79-85 RX7 (RACING BEAT) The Racing Beat strut tower brace for the 1979-85 RX-7 is back […]
-
Mazdatrix policies for our website and store.
-
This list is what we call “typical” parts needed to install a 48IDA Weber on a Rotary engine. Pick your manifold, choke size, emulsion tubes, jets, etc. — each part is as an “active” link you can click on – goes direct to the part (except the JEGS links at the bottom)- that you can […]
