SERVICE, PRESS ONE BEARING WITHOUT SCREW
Press One Bearing without Screw. Includes all types of rotor bearings and all main bearings before ’93.
(“Screw” bearings are the 93-11 Main bearings with a set screw)
| SKU: | SV-BRG-PRESSXS6 |
SERVICE, PRESS ONE BEARING WITHOUT SCREW
$30.00
Related Products:
-
-
SERVICE PRESS ONE BEARING WITH SCREW
SERVICE PRESS ONE BEARING WITH SCREW
Labor only for 93-11 Main bearings which all use a retaining screw.
Does not include a new/replacement screw.
SKU: SV-BRG-PRESS8S6 -
-
Side Cut Two Rotors
Side cut two rotors for high RPM or high boost engines.
When a Rotary engine is spun to high RPM’s — say 8500+, or has a lot of boost, the rotors tend to “wobble” (for lack of a better term) and first the corner seal area hits the side housings- then more of the rotor and rotor gear will hit the side housings. Needless to say this is bad — trashes the rotors and damages the side housings.
For “race” motors we machine off anywhere from .005″ to .008″ per side to gain the extra clearance needed. Please tell us the RPM and / or boost you are going to be using.
Price does not include the rotors or return shipping to you.
We can do this to either new (which we prefer) or CLEANED used rotors — you have to clean them please.SKU: SV-ROTOR-SIDE
You May Also Like:
-
WPC TREATMENT ONE CORNER SPRING
WPC Treatment, One Corner Seal Spring
Treatment only. Part not included.SKU: WPC-COR-SPRING -
WPC TREATMENT, ONE DOWEL PIN
WPC Treatment, One Dowel Pin
Treatment Only. Part not included.SKU: WPC-DOWEL-PIN -
WPC TREATMENT E-SHAFT, FRICTION & DURABILITY
WPC Treatment Eccentric Shaft, Friction & Durability
Treatment only. Part not included.SKU: WPC-ESHAFT-DURA -
WPC TREATMENT FRONT OR REAR SIDE HOUSING
WPC Treatment One Front or Rear Side Housing
SKU: WPC-SIDE-HOUSIN -
WPC TREATMENT ONE MAIN BEARING
WPC Treatment One Main Bearing
Treatment Only. Part not included.SKU: WPC-MAIN-BEARIN -
WPC TREATMENT ONE APEX SEAL
WPC Treatment, One Apex Seal
Treatment only. Part not included.Mazdatrix is pleased to announce our newest service available, WPC Treatment. While used on our race motors in the 2007 season with great success, we have decided to spread the success on to you! WPC is a proven treatment process that has been used for many years in Japan whereby ultra fine particles of various media are fired at high velocity towards the surface of a product. The thermal discharge that takes place upon impact permanently changes the surface of the metal by compaction and creates a harder, more durable final product. 
SKU: WPC-APEX-SEAL
